This automatic step X4 for VW T7 Transporters built in 2024 or later with front-wheel drive (FWD) significantly improves comfort and safety when getting in and out of the vehicle on a daily basis. Especially in commercial use with frequent stop-and-go traffic, it makes everyday work noticeably easier.
The generous step surface measuring 975 x 248 x 45 mm, combined with a load capacity of up to 250 kg, offers a stable and durable entry solution for service vehicles, tradesmen, and delivery services.
Why a step is useful on the VW T7 Transporter
In the new T7 Transporter, too, the entry edge is above the ergonomically ideal step zone for frequent use. An automatic step reduces the height difference, increases sure-footedness, and minimizes strain on the knees and back.
Electric or mechanical version?
Two versions are available for the VW T7 Transporter:
-
Electric comfort version with automatic extension and retraction
-
Mechanical, door-integrated version without electrical connection
Both versions are designed for professional continuous use and can bear loads of up to 250 kg.
Suitable for VW T7 Transporter (from 2024)
The automatic step is compatible with the following vehicle sizes:
🚐 Vehicle sizes – VW T7 Transporter (from 2024)
| Designation |
Rear doors |
Wheelbase |
Overall length |
Vehicle height |
| L1H1 |
Tailgate / Swing doors |
3,100 mm |
5,050 mm |
1,959 mm |
| L2H1 |
Tailgate / Swing doors |
3,500 mm |
5,450 mm |
1,963 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6 (German registration).
Electric step – modern operating comfort
The electric version extends automatically when the right-hand sliding door (passenger side) is opened and retracts again when it is closed – with an extension time of approx. 2 seconds.
- Anti-trap protection with automatic shut-off
- Status display in the driver's area
- Automatic, manual, and combined modes
- Camping mode for stationary operation
- Very low standby consumption
- Electronic end position detection
- ECE R10-compliant electronics
- Load capacity up to 250 kg
Mechanical step – durable & independent
The mechanical, door-combined version works completely without an electrical connection. A sturdy actuating arm is mounted directly on the right-hand sliding door and controls the movement purely mechanically.
- No electrical connection required
- Very robust construction
- Low maintenance and durable
- Ideal for continuous commercial use
- Load capacity up to 250 kg
Electric or mechanical – a direct comparison
🔍 Comparison – electric vs. mechanical step (VW T7 Transporter FWD)
| Criterion |
Electric |
Mechanical (door combined) |
| Activation |
Motor-driven via door signal |
Via door arm on the sliding door |
| Comfort |
Very high |
Robust & functional |
| Load capacity |
250 kg |
250 kg |
| Power consumption |
Very low quiescent current |
No power connection |
| Recommended for |
Service and delivery vehicles |
Commercial & continuous use |
Conclusion: Convenient entry solution for the VW T7
Whether electric with modern comfort features or mechanical and particularly robust, this automatic step X4 for VW T7 Transporters from 2024 offers a safe, durable, and practical retrofit solution for professional applications.
Frequently asked questions about the VW T7 Transporter step (from 2024)
Which VW T7 models is the step suitable for?
Suitable for VW T7 Transporters from 2024 onwards in the L1H1 and L2H1 variants with front-wheel drive.
What is the maximum load capacity?
The maximum load capacity is 250 kg.
What are the dimensions of the step surface?
The step surface measures 975 x 248 x 45 mm.
On which side of the vehicle is it installed?
It is installed exclusively on the right-hand sliding door (passenger side).
Is the step available in electric and mechanical versions?
Yes, it is available as an electric comfort version or a mechanical, door-integrated version.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden