The black aluminum roof rack for Fiat Ducato models built in 2006 or later is the professional solution for tradespeople, construction workers, and service technicians. The aerodynamically shaped crossbars noticeably reduce wind noise – ideal for frequent drivers and long motorway journeys. Integrated rear rollers across the entire width make loading and unloading ladders, pipes, or profiles much more convenient.
Which roof rack fits the Fiat Ducato from 2006 onwards?
Short answer: Suitable for L1H1 to L5H3 with wing doors. The decisive factors are wheelbase, overall length, and roof height – please compare the dimensions with your vehicle registration document.
Important note: The designations L4 and L5 may vary depending on the country. Before ordering, please check the dimensions in the table against your vehicle.
Suitable vehicle variants – Fiat Ducato
🚐 Vehicle variants – Fiat Ducato (from 2006 onwards)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Wing doors |
3,000 mm |
4,963 mm |
2,254 mm |
3.2 m x 1.7 m |
| L2H1 |
Swing doors |
3,450 mm |
5,413 mm |
2,254 mm |
3.2 m x 1.7 m |
| L2H2 |
Swing doors |
3,450 mm |
5,413 mm |
2,524 mm |
3.2 m x 1.7 m |
| L4H2 |
Swing doors |
4,035 mm |
5,998 mm |
2,524 mm |
3.8 m x 1.7 m |
| L4H3 |
Swing doors |
4,035 mm |
5,998 mm |
2,764 mm |
3.6 m x 1.6 m |
| L5H2 |
Swing doors |
4,035 mm |
6,363 mm |
2,524 mm |
4.2 m x 1.7 m |
| L5H3 |
Swing doors |
4,035 mm |
6,363 mm |
2,764 mm |
4.2 m x 1.6 m |
Note: Vehicle length = item 18, vehicle height = item 20, year of manufacture = item 6 in the vehicle registration document (German registration).
Why aluminum is the better solution for the Fiat Ducato
🔎 Comparison – aluminum vs. simple steel roof racks (Fiat Ducato)
| Criterion |
Aluminum roof rack |
Simple steel systems |
| Dead weight |
Significantly lighter despite large roof area |
Higher |
| Noise |
Aerodynamically shaped cross profiles |
Higher air resistance |
| Corrosion protection |
Very durable & weather-resistant |
Depending on coating |
| Modular |
Flexible adaptation to long goods |
Often limited |
| Long-term use |
Ideal for daily commercial use |
Varies depending on quality |
Advantages in daily use
- Aerodynamic crossbars for smoother driving
- Rear rollers across the entire width of the roof
- Modular sliding crossbars
- Black aluminum design for a modern look
- Installation height approx. 24 cm
- Assembly time approx. 35–45 minutes
Installation
Attachment is carried out at the factory-set fixing points under the roof covers. No additional drilling is required on the vehicle. Detailed installation instructions can be found in the "Technical Details" section.
Optional accessories
-
Porte Tube Pro – lockable transport tube for long items
-
Safe Clamp – quick ladder clamp with safety lock
-
LadderStow – ergonomic ladder loading aid
-
Walkway/platform – safe working on the roof
-
Rear door ladder – only for vehicles with wing doors
Conclusion
The black aluminum roof rack for Fiat Ducato models from 2006 onwards is designed for maximum everyday practicality. Robust, aerodynamic, and flexibly configurable – ideal for professional requirements in daily use.
FAQs about the black aluminum roof rack for Fiat Ducato models from 2006 onwards
Will the roof rack really fit my Fiat Ducato?
The roof rack fits Fiat Ducato models from 2006 onwards, provided that the wheelbase, overall length, and vehicle height match the specifications in the table. Please check the dimensions before ordering (vehicle registration document: length point 18, height point 20, year of manufacture point 6).
Why do I need to pay special attention to L4 and L5?
The designations L4 and L5 may be used differently depending on the country. Therefore, it is not the abbreviations that are decisive, but the actual dimensions from the table in comparison to your vehicle.
What are the advantages of aluminum over simple steel roof racks?
Aluminum is significantly lighter, corrosion-resistant, and ideal for daily professional use. In combination with aerodynamic crossbars, the system often runs more quietly and efficiently than simple steel constructions.
Are rear rollers included in the scope of delivery?
Yes. The rear rollers are already included and extend across the entire width of the roof rack. This makes it noticeably easier to load ladders, pipes, and long items.
Can I position the cross bars flexibly?
Yes. The crossbars can be moved freely along the rail and thus adapted to your cargo – practical for changing applications.
How is it installed?
Installation is carried out at the factory-set fixing points under the roof covers. Installation instructions can be found in the "Technical Details" section. Installation typically takes around 35–45 minutes (depending on the vehicle).
Which accessories are compatible with the roof rack?
Depending on your needs, you can add accessories such as Porte Tube Pro (transport tube), Safe Clamp (ladder clamp), LadderStow (ladder aid), running board/platform, or a rear door ladder (only for wing doors).
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
