The black aluminum roof rack for MAN TGE and VW Crafter models built in 2017 or later is the ideal solution for tough commercial applications: quiet on the highway, flexible in design, and practical for loading. Thanks to its aerodynamic crossbar shape, the rack runs smoothly, and the rear rollers across the entire width of the roof rack make loading ladders, pipes, or long items noticeably easier.
Which MAN TGE / VW Crafter roof rack variants are compatible?
This roof rack is designed for roof heights H2 and H3. Below you will find the compatible vehicle configurations (length, height, wheelbase). Compare the values with your vehicle registration document – this will ensure you make the right choice first time.
Product description: Black roof rack for MAN TGE & VW Crafter
The system consists of a robust aluminum construction in black and is designed for everyday professional use. The crossbars can be moved along the rails so that you can adjust the support points exactly to your load – whether it's a ladder pack, cable duct, scaffolding parts, or material boxes.
Areas of application: typical everyday professional use
-
Crafts & assembly (ladders, pipes, profiles, cable ducts)
-
Construction & service (changing loads, flexible crossbar positions)
-
Fleet vehicles (uniform system, fast loading)
-
Conversion/camper (transport boxes, long goods, optional platform)
Suitable vehicle configurations MAN TGE / VW Crafter
The roof rack is suitable for H2/H3 and the following vehicle data:
🚐 Vehicle variants – MAN TGE / VW Crafter (from 2017)
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L3H2 |
FWD & RWD* |
3,640 mm |
5,986 mm |
2,355 / 2,390 mm |
3.6 m × 1.6 m |
| L3H3 |
FWD & RWD* |
3,640 mm |
5,932 mm |
2,590 / 2,625 mm |
3.6 m × 1.6 m |
| L4H3 |
FWD & RWD* |
4,490 mm |
6,836 mm |
2,590 / 2,625 mm |
4.2 m × 1.6 m |
| L5H3 |
FWD & RWD* |
4,490 mm |
7,391 mm |
2,590 / 2,625 mm |
4.8 m x 1.6 m |
*FWD = front-wheel drive, *RWD = rear-wheel drive
💡 Note: Vehicle length = vehicle registration document item 18, vehicle height = item 20, year of manufacture = item 6 (applies to German vehicle registration documents).
Installation on MAN TGE / VW Crafter
Installation is carried out using the factory-fitted fixing points under the plastic caps on the vehicle roof. Remove the caps, screw on the mounting feet, and install the roof rack – no unnecessary adjustments required. You can find the installation plan in the shop under "Technical Details."
Advantages of the black aluminum roof rack
-
Aerodynamic crossbars for quieter driving on highway stretches
-
Rear rollers across the entire width for convenient loading
-
Sliding crossbars for flexible load adjustment
-
Aluminum construction for long-lasting professional use
-
Black finish – fits perfectly with modern fleets and design packages
Comparison: steel vs. aluminum on the MAN TGE / VW Crafter
The material plays a particularly important role in large transporters such as the TGE/Crafter. Aluminum is usually easier to handle and often more efficient in everyday use (e.g., when converting or changing loads). Steel is often chosen for its solidity, but it is often heavier and, depending on the design, less aerodynamic.
🔍 Material comparison – steel vs. aluminum (TGE/Crafter)
| Criterion |
Aluminum roof rack |
Steel roof rack |
| Weight/handling |
Usually lighter, easier to install |
Usually heavier |
| Noise / aerodynamics |
Often quieter due to tubular shape |
Often louder, depending on the system |
| Flexibility |
Very good (trusses can be moved) |
Often less flexible |
| Everyday use (loading) |
Very convenient with casters |
Usually more effort without casters |
Accessories & extensions
With the right accessories, the roof rack becomes a complete professional setup:
-
Porte Tube Pro: Aerodynamic transport tube for long items
-
Safe Clamp: Ladder clamp with quick operation and locks
-
LadderStow: Ergonomic loading aid for ladders
-
Walkway / Platform: Safe loading and working on the roof
-
Rear door ladder: Non-slip ladder for vehicles with wing doors
Conclusion: Black roof rack for MAN TGE & VW Crafter
If you are looking for a black aluminum roof rack for MAN TGE or VW Crafter that really saves time in everyday use, you have come to the right place: aerodynamically pleasing, quick to load thanks to rear rollers, and flexible thanks to sliding crossbars. Exactly the combination that makes the difference in professional use.
Frequently asked questions about the black roof rack for MAN TGE / VW Crafter
For which roof heights is the roof rack suitable?
The roof rack is designed for vehicles with roof heights H2 and H3. Please check your vehicle data against the table.
Does the roof rack fit front-wheel and rear-wheel drive vehicles?
Yes, the variants in the table are designed for FWD (front-wheel drive) and RWD (rear-wheel drive). It is important to select the correct length/height.
What are the rear rollers for?
They make it easier to load ladders and long items across the entire width. You can roll the material onto the rack in a controlled manner instead of lifting it completely.
Can I position the crossbars individually?
Yes, the crossbars can be moved along the rails. This allows you to quickly adapt the carrier to different loads.
Which accessories are most useful?
Safe Clamp and LadderStow are very popular for ladders. Porte Tube Pro is ideal for long items. If you often have to climb onto the roof, you will benefit from the running board/platform.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
