Black airline track, flat profile – 2 meters
The two-meter-long, flat, black powder-coated aluminum airline rail can be used as a surface-mounted or flush-mounted rail.
Thanks to the wide flanges and the associated option of fastening on the outside and inside and in the airline grid with screws or rivets, any forces that occur can be distributed evenly over a larger area.
This results in a higher possible tensile load.
The airline rail as a black flat profile is not pre-drilled and can therefore be glued with Sikaflex 554, for example, on the outside and inside, or drilled at the desired points.
Due to the manufacturing process, there are two holes on the outside of the airline rails.
| Length: |
2 meters (1,990 mm +/-5 mm) |
| Width: |
65 mm |
| Total height: |
11 mm |
| Base thickness: |
3.2 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Weight: |
690 g/m |
| Material: |
Aluminum - powder coated |
| Manufactured |
EU |
Load capacities of the airline rail Flat profile - black
An important point when installing an airline rail is its attachment to the substrate. Different values
are achieved depending on the nature, material composition, thickness of the substrate surface, the choice of fittings (end fittings), and the type of attachment.
LC strength
| End fitting |
102076 |
102036 |
| Z 90° |
500 daN |
500 daN |
| X-Z 45° |
500 daN |
500 daN |
| Y-Z 45° |
400 daN |
400 daN |
LC strength when fastened:- every 75 mm opposite with an M6 DIN 7380 8.8 pan
head screw An important point when installing an airline rail is the fastening in the substrate.
Depending on the nature, material composition, and thickness of the substrate surface, different values are achieved. The installer of the load securing
aids is responsible for the installation and the resulting possible load!
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
