Cargo area paneling for the Ford Transit Courier II
CNC-milled side panel lining made of 4 mm thick plastic honeycomb profile and 4 mm coated or uncoated birch plywood, for Ford Transit Courier II from model year 2024 onwards.
The scope of the lining consists of the upper lining parts in the window area (see drawing).
For the Ford Transit Courier with the following vehicle dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Cargo area length |
| L1H1 |
Wing doors |
2,692 mm |
4,337 mm |
1,827 mm |
1,802 mm |
| L1H1 |
Tailgate |
2,692 mm |
4,337 mm |
1,827 mm |
1,802 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The interior trim is delivered to the upper window areas specified by the vehicle manufacturer.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels.
Uncoated plywood is suitable for coating with fabrics or felt. The flexible but sturdy plastic honeycomb profile or the moisture-resistant gray-coated plywood is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original fastening points are not taken into account during installation.
Features of the side wallpaneling - CNC-milled to fit your vehicle
perfectly - Mounting materials included in
delivery - 4 mm
plastic honeycomb profile - 4 mm multiplex plywood
The cargo area paneling is delivered by parcel service.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com