Cargo area paneling for Nissan Townstar - L2
CNC-milled side panel lining made of 4 mm thick plastic honeycomb profile or 4 mm birch plywood, for Nissan Townstar L2 from model year 07/2023.
Not for vehicles with roof hatch (ladder flap)!!!
Suitable for the Nissan Townstar with the following vehicle dimensions:
| Rear door(s) |
Wheelbase |
Overall length |
Cargo area length |
Cargo area height |
Vehicle height |
Designation |
| Double swing doors |
3,100 mm |
4,910 mm |
2,230 mm |
1,256 mm |
1,864 mm |
L2H1 |
| Tailgate |
3,100 mm |
4,910 mm |
2,230 mm |
1,256 mm |
1,864 mm |
L2H1 |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The plywood lining is divided in the middle. The plastic honeycomb profile runs continuously from top to bottom (see pictures). The
interior lining is delivered in the areas specified by the vehicle manufacturer, including all wall linings, the side door lining, side door window cutouts, and the lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray moisture-coated plywood is recommended for protecting the cargo area.
The fastening kit is included in the scope of delivery.
Fastening is carried out with self-tapping screws.
The original fastening points are not taken into account during installation.
Properties of the side wallpaneling - Precisely milled to fit your vehicle
- Mounting material included in
delivery - 4 mm plastic
honeycomb profile - 4 mm multiplex plywood
Shipping is carried out by a freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com