Cargo area trim for Opel Movano C - L2 - Multicap

Cargo area trim for Opel Movano C - L2 - Multicap

SKU: 107341-OMC
Category: Opel Laderaumverkleidung

- Interior/side wall paneling for Opel Movano C L2H2 or L2H1
- Total vehicle length: 5
,413 mm - 4 mm
plastic honeycomb profile - 4 or 6.5 mm multiplex plywood

Materialauswahl
Dachhöhe

from

339,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description
PDF (2)

Cargo area trim for Opel Movano C - L2 - Double cab

Precisely fitting CNC-milled side panel lining made of 4 mm thick plastic honeycomb profile and 4 or 6.5 mm uncoated or gray-coated birch plywood for Opel Movano C from 2022 onwards with Snoeks double cab.

The interior trim is only suitable for Snoeks double cab vehicles with a partition wall at the C-pillar and does not fit vehicles with DURISOTTI double cab partition walls!!!

For the medium wheelbase L2 and roof height H1 + H2 with the following vehicle dimensions:

Designation	Wheelbase	Overall length	Cargo space length	Cargo area height	Vehicle height
L2H1	3,450 mm	5,413 mm	2,490 mm	1,662 mm	2,254 mm
L2H2	3,450 mm	5,413 mm	2,490 mm	1,932 mm	2,522 mm

Note: You will find the vehicle length in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)

Design and scope of delivery of the cargo area trim

The interior trim is delivered in the areas specified by the vehicle manufacturer, including all wall trim, side door trim, side door window cutouts, and lower rear door cutouts.

The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated

plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray moisture-coated plywood is recommended for protecting the cargo area.

The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original mounting points are not used during installation.

Features of the side wall
paneling - CNC-milled to fit your vehicle
perfectly - Mounting hardware
included - 4 mm plastic
honeycomb profile - 4 or 6.5 mm multiplex plywood

Shipping is carried out by a freight forwarder.