Side wall/interior trim for VW Crafter and MAN TGE ProCab
Pre-cut side wall paneling for
Snoeks double cab vehicles made of 4 mm thick plastic honeycomb profile or 4 or 6.5 mm birch plywood, for VW Crafter and MAN TGE with double cab from model year 03/2017 onwards.
For wheelbase L3 with 3,640 mm and a total vehicle length of 5,986 mm and roof heights H2 and H3.
| Designation |
Wheelbase |
Overall length |
Vehicle height |
Cargo space height |
Cargo space length |
| L3H3 |
3,640 mm |
5,986 mm |
2,590/2,625 mm |
1,961/1,861 mm* |
approx. 2,700 mm |
| L3H2 |
3,640 mm |
5,986 mm |
2,355/2,390 mm* |
1,726 mm |
Approx. 2,700 mm |
FWD/RWD*
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The interior trim is delivered in the areas specified by the vehicle manufacturer, including the wall trim and the upper and lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray moisture-resistant coated plywood is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original fastening points are not taken into account during installation.
Features of the side wallpaneling - for Snoeks
double cab vehicles - precisely milled
to fit your vehicle - mounting
material included in delivery - 4 mm
plastic honeycomb profile - 4 or 6.5 mm multiplex plywood
Shipping is carried out by a freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
