A commercial van floor has to withstand demanding everyday use. In the Citroën Jumper L1 from 2006 onwards, toolboxes, machinery, building materials and other equipment are regularly loaded, transported and unloaded. Our precision CNC-cut plywood van floor for the Citroën Jumper helps protect the original vehicle floor against scratches, dents and everyday wear, providing a durable foundation for professional use.
Manufactured from weather-resistant bonded birch plywood, this vehicle-specific floor is designed for the short-wheelbase Citroën Jumper L1 with H1 or H2 roof height. It is supplied in two sections, features aluminium edge protection at the loading entrances and is available in 9 mm or 12 mm thickness with seven different finish and thickness combinations.
Which Plywood Van Floor Fits the Citroën Jumper L1 from 2006?
Quick answer: This plywood van floor is designed for the Citroën Jumper L1 panel van from 2006 onwards, with a wheelbase of 3,000 mm and an overall vehicle length of approximately 4,963 mm. It is suitable for both L1H1 low-roof and L1H2 high-roof versions. The floor consists of two precision CNC-cut panels, which are joined during installation and secured using the vehicle's original lashing points.
Citroën Jumper L1H1 and L1H2 – Vehicle Dimensions
The Citroën Jumper L1 combines a relatively compact overall vehicle length with a spacious load compartment. For tradespeople, mobile workshops and service companies, the short-wheelbase version offers a practical balance between usable cargo space and everyday manoeuvrability.
Both L1H1 and L1H2 versions have the same basic load floor dimensions. The main difference is the roof height: the L1H1 is particularly useful where vehicle height restrictions apply, while the L1H2 provides additional interior height for taller equipment and storage systems.
| Vehicle specification |
L1H1 – Low roof |
L1H2 – High roof |
| Wheelbase |
3,000 mm |
3,000 mm |
| Overall vehicle length |
4,963 mm |
4,963 mm |
| Load compartment length |
2,670 mm |
2,670 mm |
| Load compartment height |
1,662 mm |
1,932 mm |
| Overall vehicle height |
2,254 mm |
2,522 mm |
Vehicle identification: Before ordering, please check the overall vehicle length, wheelbase and roof height. Vehicle specifications may vary depending on model year and equipment.
Important fitment information: This plywood floor is designed exclusively for panel vans. It is not suitable for passenger or crew cab versions with additional seat rails or seating installations in the load compartment.
Which Floor Finish Is Best for Your Citroën Jumper?
Whether you regularly transport heavy toolboxes or use your Jumper as a mobile service vehicle, choosing the right floor finish can make everyday loading, cleaning and maintenance easier.
The standard film-faced plywood floors are available in brown, light grey and granite effect, each in 9 mm or 12 mm thickness. A 12 mm grey anti-slip ribbed floor is also available for customers who prefer a more pronounced surface texture.
| Surface finish |
Thickness |
Features |
| Brown |
9 or 12 mm |
Classic, durable film-faced plywood with a slip-resistant texture |
| Light grey |
9 or 12 mm |
Light-coloured, easy-to-clean and durable surface |
| Granite effect |
9 or 12 mm |
Decorative finish that helps conceal minor dirt and marks |
| Grey anti-slip ribbed finish |
12 mm |
Flexible, slip-resistant coating with a pronounced surface texture |
9 mm or 12 mm Plywood Flooring – Which Thickness Should You Choose?
In a commercially used Citroën Jumper, the load floor is often exposed to concentrated pressure from toolboxes, machinery and heavy equipment. Choosing the appropriate plywood thickness therefore depends on the type and frequency of use.
The 9 mm plywood floor protects the original loading surface while keeping additional vehicle weight relatively low. It is a practical choice for service vehicles and applications involving predominantly lighter cargo.
The 12 mm plywood floor offers greater material thickness and is particularly suitable for load compartments exposed to more demanding daily use. It is worth considering if you regularly carry toolboxes, machinery or heavy transport containers.
The approximate material weight of the standard plywood panels is 6.8 kg/m² for 9 mm flooring and 8.2 kg/m² for 12 mm flooring.
Practical tip: If your Jumper is used as a mobile workshop, consider the additional loads created by tool cabinets, shelving and other fitted equipment. These installations require suitable fixing points connected to appropriate vehicle structures. The plywood floor alone is not a substitute for a properly engineered mounting system.
Weather-Resistant Birch Plywood for Everyday Commercial Use
The van floor is manufactured from high-quality birch plywood with weather-resistant bonding. Its coated surfaces are designed for the typical demands of commercial transport and can be cleaned easily after carrying tools, machinery and building materials.
The brown and light grey film-faced plywood panels feature a slip-resistant textured surface. The pattern is embossed into the film coating during manufacturing and is not a separately applied anti-slip coating.
The granite-effect finish combines a modern appearance with a practical, easy-to-maintain surface. Its decorative pattern makes minor dirt and everyday marks less noticeable.
The grey anti-slip ribbed finish is available exclusively in 12 mm thickness. Its flexible, textured coating provides a pronounced slip-resistant surface and helps protect the underlying plywood against moisture.
Load securing information: A slip-resistant floor surface does not replace proper cargo restraint. Loads must always be secured against sliding, tipping and other movement in accordance with the applicable requirements.
Two-Piece CNC-Cut Van Floor with Aluminium Edge Protection
The Citroën Jumper L1 plywood van floor is supplied in two vehicle-specific CNC-cut sections. The panels are designed to match the contours of the load compartment and are joined together during installation.
The two-piece construction makes the panels easier to handle when fitting them inside the vehicle. They are connected using screws that remain discreet after installation and do not interfere with normal use of the loading surface.
Aluminium edge protection at the loading entrances helps protect the exposed plywood edges against damage during frequent loading and unloading. This is particularly useful when transporting toolboxes, storage containers and working equipment.
Installation Using the Original Citroën Jumper Lashing Points
Before installation, the original vehicle floor should be thoroughly cleaned and checked for any protruding objects.
The two floor panels are positioned inside the load compartment, aligned with the vehicle contours and joined using the supplied screw connections.
The included recessed lashing point cups are fitted into the prepared cut-outs. The floor is then secured using the vehicle's original lashing rings.
If required, a suitable additional fixing in the central floor area may help reduce vibration. Any additional fixing materials and installation methods must be appropriate for the vehicle.
After installation, all lashing rings must be correctly secured and remain suitable for their intended use.
Optional Recessed Airline Tracks for the Jumper Van Floor
For a more customised load compartment layout, the plywood floor can optionally be prepared with recessed airline tracks.
The tracks are positioned across the direction of travel. The plywood is precision-routed at the required positions, allowing the airline tracks to be recessed and bonded into the floor panel.
The standard track length is 1,000 mm per section. Alternative lengths and installation positions are available on request.
Important: Recessed airline tracks can only be integrated into 12 mm thick plywood floors.
Suitable Light semi-round airline tracks are also available in our online shop.
Safety information: The permissible load capacity of recessed airline tracks depends on the complete fixing arrangement. Bonding a track into the plywood alone does not establish a certified lashing capacity. For cargo securing applications, the tracks, fixings and connection to the vehicle structure must be appropriately designed.
Matching Load Compartment Protection for the Citroën Jumper L1
A durable plywood floor provides the foundation for protecting the load compartment. In commercial vehicles, however, it is also worth protecting the side walls, interior roof and wheel arches against everyday damage.
Our load compartment lining for the Citroën Jumper L1 helps protect the interior side walls against scratches, impacts and everyday wear. Vehicle-specific lining panels complement the plywood floor and provide more comprehensive interior protection.
The wheel arches are also particularly exposed to damage during loading and unloading. Our ABS plastic wheel arch covers for the Citroën Jumper offer lightweight, easy-to-clean protection for these vulnerable areas.
Alternatively, plywood wheel arch covers for the Citroën Jumper are available for customers who prefer a traditional timber-based van interior. They complement the plywood floor and are particularly suitable for conversions using wooden lining panels.
Our recommendation: If your Jumper is regularly used as a mobile workshop or service vehicle, combining suitable floor, side wall, roof and wheel arch protection can help reduce everyday wear and preserve the condition of the original vehicle interior.
Citroën Jumper L1 – Ready for the Next Working Day
The plywood van floor for the Citroën Jumper L1H1 and L1H2 from 2006 onwards combines precision CNC cutting with durable birch plywood and a choice of practical surface finishes.
Its two-piece construction, aluminium edge protection and installation using the original lashing points make it a practical solution for everyday commercial use. Whether you need a reliable foundation for a mobile workshop, protection for regular tool transport or a durable floor for a custom van conversion, the right plywood floor helps keep your Citroën Jumper ready for work.