The electric, fully automatic step from the TCE series for the Mercedes-Benz Sprinter 906 and 907 as well as the VW Crafter I is a compact, heavy-duty entry solution for vehicles that see intensive use. With a tread area of 670 × 300 mm and a load capacity of up to 400 kg, it offers high stability combined with a space-saving design.
Side, fully automatic step – TCE series for MB Sprinter 906 / 907
The heavy-duty telescopic step TCE is suitable for:
-
Mercedes-Benz Sprinter type 906 from 2006 onwards (rear-wheel drive)
-
Mercedes-Benz Sprinter type 907 from 2018 onwards (rear-wheel drive)
-
VW Crafter I built between 2006 and 02/2017 (rear-wheel drive)
This model is not suitable for the Mercedes-Benz Sprinter Type 910 with front-wheel drive, as the underbody and installation situation differ significantly.
Thanks to its compact length, this TCE variant is particularly suitable for vehicles with limited installation space or additional underfloor components.
Areas of application in professional passenger transport
Sprinter models with rear-wheel drive are often used in daily continuous operation. The compact TCE step is specially designed for these requirements.
-
Taxi and rental car operations
-
Shuttle and transfer vehicles
-
Transport for disabled and mobility-impaired persons
-
Vehicles with limited installation space under the entry
Technical data and standard equipment
The robust construction, protected drive, and integrated safety features ensure reliable operation even with frequent use.
Technical data – TCE electric step for Sprinter & Crafter
| Feature |
Design |
| Vehicles |
MB Sprinter 906 / 907, VW Crafter (2006–02/2017) |
| Drive |
Rear-wheel drive |
| Drive type Step |
Electric, fully automatic |
| Step surface |
670 × 300 mm |
| Load capacity |
up to 400 kg |
| Safety function |
Integrated obstacle detection (auto-stop) |
| Protection class |
100% waterproof |
| Basic equipment |
Vehicle-specific installation kit, warning light, cable set, switch |
Advantages of the compact TCE step for Sprinter & Crafter
This version of the TCE series combines high load capacity with minimal space requirements.
-
Compact design with full heavy-duty load capacity
-
400 kg load capacity for intensive use
-
Fully automatic operation for consistent processes
-
Protected drive for long service life
-
Integrated obstacle detection (autostop)
-
100% waterproof – suitable for year-round use
Comparison: TCE 670 mm vs. 1000 mm version for Sprinter & Crafter
Depending on the vehicle equipment, a compact or wider step may be more suitable. The difference is particularly evident in terms of space requirements.
Comparison of TCE steps for Sprinter & Crafter
| Feature |
TCE 670 mm |
TCE 1000 mm |
| Overall length |
Very compact |
Larger |
| Standing comfort |
Good |
Very high |
| Area of application |
Limited installation space |
Maximum comfort |
Conclusion
The electric, fully automatic TCE step with a 670 × 300 mm tread surface is the ideal solution for Mercedes-Benz Sprinter 906 / 907 and VW Crafter vehicles with rear-wheel drive when a compact but extremely durable entry aid is required. It offers heavy-duty quality with minimal space requirements – ideal for professional continuous use.
FAQ – TCE step 670 mm for MB Sprinter 906/907
Which Sprinter models is this step suitable for?
The step is suitable for Mercedes-Benz Sprinter type 906 from 2006 onwards and type 907 from 2018 onwards with rear-wheel drive.
Why is this version not suitable for the Sprinter 910?
The Sprinter type 910 has front-wheel or all-wheel drive and a different underbody construction, which means that this TCE variant is not compatible.
Is the load capacity sufficient despite the compact design?
Yes. Even in the 670 mm version, the TCE step offers a load capacity of up to 400 kg and is designed for continuous use.
Is the step suitable for year-round use?
Yes. The TCE step is 100% waterproof and suitable for continuous outdoor use.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden