The Ford Transit Connect III from 2022 is a compact commercial vehicle designed for everyday jobs where tools, spare parts, parcels and other materials are frequently loaded and unloaded through the rear cargo area. This makes the rear bumper one of the areas that can easily come into contact with cargo during daily use.
The vehicle-specific aluminium rear bumper protector for the Ford Transit Connect III covers this exposed section of the bumper. It can be fitted to protect a bumper that is still in good condition or used to conceal existing scratches and damage within the area covered by the protector.
All available versions are made from 1.5 mm aluminium and feature a folded edge. Six different surface finishes are available – from classic aluminium chequer plate and silver or black anodised versions to a brushed stainless-steel look and aluminium with machined grooves.
Which bumper protector fits the Ford Transit Connect III?
In short: This aluminium rear bumper protector is designed for the Ford Transit Connect III from 2022. All six versions are made from 1.5 mm aluminium, feature a folded edge and are attached using special adhesive tape applied to the rear. No drilling or screws are required.
For a rear cargo entrance that is used throughout the working day
For a service or trade vehicle, everyday work often involves many individual stops. Tools are taken out, spare parts are loaded, materials are returned and transport containers are changed – which means the rear cargo entrance may be used again and again throughout the day.
As a result, items are frequently moved across the loading edge. Even small contacts when lifting, lowering or pulling cargo out of the vehicle can gradually leave visible marks on the rear bumper.
The aluminium bumper protector covers this exposed area and provides an additional protective surface over the bumper underneath.
Practical for service work, trades and everyday transport
The bumper protector is particularly useful on a Ford Transit Connect III that is regularly used as a working or transport vehicle. Typical applications include:
-
Service vehicles with frequent access to tools and spare parts
-
Trade vans carrying toolboxes, machines and consumable materials
-
Installation vehicles with changing equipment
-
Delivery and transport vehicles that are regularly loaded and unloaded
-
Mobile work vehicles where the rear cargo area is accessed several times a day
With frequent short loading operations, small contacts can quickly add up. The bumper protector therefore covers exactly the area that is repeatedly used during everyday work.
Protect a clean bumper or conceal existing scratches?
Both are possible. On a Ford Transit Connect III with a bumper that is still in good condition, the protector can be fitted early before typical signs of use begin to appear.
If the vehicle has already been in service, scratches or damage located within the area covered by the protector can be concealed underneath the aluminium surface.
Two ways to use the Transit Connect III bumper protector
| Situation |
Benefit |
| Bumper still in good condition |
The exposed area receives additional coverage during regular loading and unloading. |
| Scratches already present |
Signs of use within the covered area can be concealed underneath the aluminium bumper protector. |
Six aluminium finishes for the Ford Transit Connect III
Choosing the bumper protector is not only about protecting the rear bumper. Six different surface finishes are available, allowing the visible appearance to be selected to suit the vehicle.
The material thickness is identical for every version: all variants are made from 1.5 mm aluminium.
Available versions of the Ford Transit Connect III bumper protector
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed surface with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Chequer plate, stainless-steel look or machined grooves?
As all available versions are made from 1.5 mm aluminium, the choice can primarily be based on the appearance you prefer.
Classic aluminium chequer plate provides a functional, technical commercial-vehicle look. Silver anodised and black anodised chequer plate versions are also available for customers who prefer the same characteristic structure with a different finish.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. Matt silver anodised and black anodised aluminium with machined grooves complete the range.
This allows the bumper protector to suit both a purely functional working van and a Transit Connect where a more coordinated rear appearance is preferred.
Why does the bumper protector have a folded edge?
During loading and unloading, it is not only the upper surface of the rear bumper that can come into contact with cargo. The adjoining loading-edge area can also be touched when items are lifted, lowered or pulled out of the vehicle.
For this reason, the bumper protector is supplied with a folded edge. The aluminium cover extends from the upper surface over the adjoining section of the loading edge, increasing the area covered by the protector.
Installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – Ford Transit Connect III bumper protector
Ford Transit Connect III aluminium bumper protector – product specifications
| Feature |
Specification |
| Vehicle |
Ford Transit Connect III |
| Model year |
From 2022 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: Many small loading operations can matter more than one big one
On a compact service vehicle, the rear bumper is rarely exposed to one spectacular oversized load. More often, it is the repeated small jobs throughout the day: toolbox out, spare part in, materials back inside – and then the same routine again at the next customer. 😄
That is exactly why covering the loading edge early can make sense. The aluminium bumper protector sits over the area where these repeated contacts would otherwise gradually leave visible marks.
If the bumper is already scratched, existing signs of use within the covered area can be concealed underneath the protector.
Frequently asked questions about the Ford Transit Connect III bumper protector
Which Ford Transit Connect does the bumper protector fit?
The bumper protector is designed for the Ford Transit Connect III from 2022.
How thick is the aluminium bumper protector?
All six available versions are made from 1.5 mm aluminium.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
Do I need to drill or use screws for installation?
No. The bumper protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Can the bumper protector conceal existing scratches?
Yes. If scratches or damage are located within the area covered by the protector, they can be concealed underneath the aluminium cover.
Why does the bumper protector have a folded edge?
The folded edge extends the coverage from the upper surface to the adjoining section of the loading edge, increasing the area covered by the aluminium.
Which version should I choose for my Transit Connect?
All six versions are made from 1.5 mm aluminium. The choice can therefore primarily be based on the appearance you prefer, such as classic chequer plate, a brushed stainless-steel look or a silver or black anodised finish.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Protection for a loading edge that works every day
One of the practical strengths of the Ford Transit Connect III from 2022 is its easily accessible cargo area. When that advantage is used throughout the working day, the rear loading edge naturally becomes one of the areas that sees regular contact with tools, materials and cargo.
The vehicle-specific 1.5 mm aluminium rear bumper protector covers this section of the bumper, features a folded edge and is attached using the special adhesive tape on the rear – without drilling or screws.
With six different aluminium finishes available, you can also choose between a classic commercial-vehicle appearance and more understated finishes to suit how your Transit Connect is used and equipped.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers