For the Renault Kangoo and Mercedes Citan from 2014 to 2020, the rear loading area is often used far more frequently than you might think. Toolboxes, parcels, spare parts and working materials are quickly taken out and loaded back into the vehicle. Over time, these repeated loading operations can leave visible signs of use on the rear bumper.
The vehicle-specific aluminium rear bumper protector for the Renault Kangoo and Mercedes Citan provides an additional cover for this frequently used area. It can be fitted as preventative protection or retrofitted later to conceal existing scratches and signs of use, provided they are located within the area covered by the protector.
You can choose from six surface finishes, all made from 1.5 mm aluminium. Every version features a folded edge and is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Which bumper protector fits the Renault Kangoo and Mercedes Citan 2014–2020?
In short: This bumper protector is designed for the Renault Kangoo and Mercedes Citan from 2014 to 2020. All six available versions are made from 1.5 mm aluminium and feature a folded edge. Installation is carried out using the special adhesive tape on the rear, with no drilling or screws required.
Many small loading operations repeatedly use the same area
With a compact van, it does not take particularly large or heavy cargo to put the rear bumper area to regular use. For service work, trades or everyday transport tasks, it is often the number of individual loading and unloading operations that adds up over months and years.
Toolboxes are taken out, materials are loaded, spare parts are collected and transport boxes are returned to the vehicle. Throughout these everyday routines, the rear bumper sits directly underneath the loading path.
The 1.5 mm aluminium bumper protector provides an additional cover for this frequently used area.
Typical situations for the Kangoo and Citan
| Use |
What happens around the rear bumper |
| Service van |
Tools, spare parts and equipment may be taken out several times during a working day. |
| Trades |
Toolboxes, machinery and working materials regularly pass across the rear loading edge. |
| Transport and deliveries |
Repeated loading and unloading concentrates everyday use on the same bumper area. |
| Long-term vehicle use |
Existing signs of use within the covered area can be concealed underneath the bumper protector. |
Preventative protection or a cover for existing signs of use
If the rear bumper is still in good condition, the protector can be fitted early to provide an additional cover for this busy area.
However, a Renault Kangoo or Mercedes Citan from this model period may already have spent many years in daily commercial use. If scratches or other signs of use have already appeared, the aluminium bumper protector can also be retrofitted. Marks located within the covered area are then concealed underneath the aluminium protector.
Six surface finishes in 1.5 mm aluminium
The bumper protector is available in six different versions. Their appearance varies, but every version is made from 1.5 mm aluminium.
Available surface finishes
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic aluminium chequer plate surface |
1.5 mm |
| Silver anodised chequer plate |
Silver anodised aluminium chequer plate |
1.5 mm |
| Black anodised chequer plate |
Black anodised aluminium chequer plate |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised |
Aluminium with machined grooves |
1.5 mm |
| Black anodised |
Aluminium with machined grooves |
1.5 mm |
Chequer plate, stainless-steel look or machined grooves?
For a classic commercial-vehicle appearance, you can choose between standard aluminium chequer plate and silver or black anodised chequer plate.
For a more understated appearance, there is also a brushed aluminium version with a stainless-steel look. This version is still made from 1.5 mm aluminium – “stainless-steel look” refers only to the appearance of the surface, not to the material itself.
The range is completed by matt silver anodised and black anodised aluminium versions with machined grooves, giving you six different surface designs to choose from.
Folded edge for additional protection
Every available version features a folded edge for additional protection around the loading edge.
This complements the aluminium cover in an area that tools, boxes and other cargo regularly pass during everyday loading and unloading.
Self-adhesive installation without drilling
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium protector to the intended area of the bumper.
No drilling or screws are required.
Important before installation:
Please read the installation instructions under “Technical Details” before fitting the protector and follow the requirements stated there.
Technical specifications at a glance
Bumper protector for Renault Kangoo and Mercedes Citan 2014–2020
| Feature |
Specification |
| Vehicles |
Renault Kangoo and Mercedes Citan |
| Model years |
2014–2020 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: Frequency matters as much as cargo size
Signs of use around the loading edge are not caused only by particularly heavy or bulky items. With the Kangoo and Citan, it can be the many smaller contacts during everyday work that gradually add up.
A toolbox or transport box that is taken out and loaded back into the vehicle several times a day will pass across the same area countless times over the course of a year. An additional cover for the rear bumper can therefore be useful even when the vehicle mainly carries smaller items.
Frequently asked questions
Which vehicles does this bumper protector fit?
The bumper protector is designed for the Renault Kangoo and Mercedes Citan from 2014 to 2020.
How thick is the bumper protector?
All six available versions are made from 1.5 mm aluminium.
Can the bumper protector conceal existing scratches?
Yes. Existing scratches and other signs of use can be concealed provided they are located within the area covered by the bumper protector.
Is the stainless-steel-look version made from stainless steel?
No. This version is also made from aluminium. “Stainless-steel look” refers only to the appearance of the brushed aluminium surface.
Do I need to drill or use screws for installation?
No. The protector is attached using the special adhesive tape applied to the rear. Please follow the installation instructions under “Technical Details” before fitting.
Aluminium protection for years of everyday use
On the Renault Kangoo and Mercedes Citan 2014–2020, it is often the many smaller loading operations that leave their mark on the rear of the vehicle over time. The 1.5 mm aluminium bumper protector provides an additional cover for this frequently used area and can conceal existing signs of use within the covered section.
With six different surface finishes available, you can also choose the version that best suits the appearance you want for your vehicle. Installation is carried out using the special adhesive tape on the rear, with no drilling or screws required.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers