On the Mercedes Sprinter from 2018 onwards, the rear bumper is one of the areas most exposed to everyday loading and unloading. Toolboxes, machines, transport containers and other cargo have to be moved across the loading edge – and even occasional contact can leave scratches and visible signs of use.
The vehicle-specific aluminium rear bumper protector for the Mercedes Sprinter from 2018 covers this vulnerable area of the rear bumper. It is suitable both for vehicles where the bumper should be protected before damage occurs and as a practical cover for existing scratches located within the area concealed by the protector.
All available versions are made from 1.5 mm aluminium and feature a folded edge. Six different surface finishes also provide a choice of appearance – from classic aluminium chequer plate and silver or black anodised versions to a brushed stainless-steel look and anodised designs with machined grooves.
Which bumper protector fits the Mercedes Sprinter from 2018?
In short: This aluminium rear bumper protector is designed for the Mercedes Sprinter from 2018 onwards. It is made from 1.5 mm aluminium, features a folded edge and is attached using special adhesive tape applied to the rear. No drilling or screws are required. Six different aluminium surface finishes are available.
Protect the rear bumper from everyday loading marks
On a commercially used Sprinter, the loading edge rarely remains untouched for long. Machines are lifted out of the cargo area, toolboxes are loaded, parcels are moved and transport containers are pulled towards the rear doors. The rear bumper sits directly below this busy loading area.
The aluminium bumper protector covers this particularly exposed section and creates an additional protective surface between the cargo and the bumper. During loading and unloading, direct contact therefore reaches the aluminium cover rather than the covered section of the bumper underneath.
This makes the protector particularly useful for trade vehicles, service vans, installation vehicles and delivery vans where the cargo area is used on a regular basis.
Protecting heavily used areas helps preserve the vehicle's condition
A working van is meant to be used, and signs of everyday work are difficult to avoid completely. However, some areas can be protected from unnecessary damage with relatively little effort. The rear loading edge is one of them.
If the bumper protector is installed early, it covers the exposed area before daily loading and unloading starts to leave visible marks on the bumper surface underneath.
If the Sprinter has already been in service for some time, the protector offers a second practical benefit: scratches or damage located within the covered area can be concealed underneath the aluminium.
Rear bumper protection for new and already-used Sprinter vans
| Bumper condition |
Benefit |
| Bumper still in good condition |
The exposed area receives additional coverage during loading and unloading. |
| Bumper already scratched |
Existing signs of use within the covered area can be concealed underneath the aluminium protector. |
Six aluminium finishes for the Mercedes Sprinter
The rear bumper protector is not only a functional accessory. The different surface finishes also allow you to choose a design that suits the vehicle and your preferred appearance.
All six versions are made from 1.5 mm aluminium. The difference lies in the design and finish of the visible surface.
Available versions of the Mercedes Sprinter bumper protector
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic aluminium chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed surface with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Which finish suits my Mercedes Sprinter?
As all versions are made from 1.5 mm aluminium, the choice can primarily be based on the appearance you prefer for your Sprinter.
Classic aluminium chequer plate provides the familiar technical appearance often associated with commercial vehicles. If you prefer the same characteristic surface structure with a different visual effect, silver anodised and black anodised chequer plate versions are also available.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. Alternatively, matt silver anodised and black anodised aluminium versions with machined grooves provide another distinctive surface design.
This makes it possible to choose a bumper protector that suits both a purely functional working van and a Sprinter where the appearance of the rear of the vehicle is also important.
Why does the bumper protector have a folded edge?
During loading and unloading, the upper surface of the rear bumper is not the only area exposed to contact. Toolboxes, transport containers and other items can also touch the adjoining edge when they are lifted, lowered or pulled out of the cargo area.
For this reason, the bumper protector is manufactured with a folded edge. The aluminium cover does not simply end on the upper surface but continues over the adjoining section of the loading edge, extending the area covered by the protector.
Self-adhesive installation without drilling or screws
A high-quality special adhesive tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – Mercedes Sprinter bumper protector
Mercedes Sprinter aluminium rear bumper protector from 2018 – product specifications
| Feature |
Specification |
| Vehicle |
Mercedes Sprinter |
| Model year |
From 2018 onwards |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: Protect the bumper before the first scratches appear
On a new or well-maintained Sprinter, the best time to fit a rear bumper protector is actually quite simple: before you really need one. 😄
When the aluminium cover is installed early, it sits between the cargo and the particularly exposed bumper surface. This can be especially useful for commercial vehicles that are expected to remain in service for several years or where keeping heavily used exterior areas in good condition is important.
If the Sprinter is already being used for work and the bumper has collected its first marks, the protector can still serve a useful purpose. Existing scratches within the covered area can be concealed, while the same section receives additional protection during future loading and unloading.
Frequently asked questions about the Mercedes Sprinter bumper protector
Which Mercedes Sprinter does the bumper protector fit?
The bumper protector is designed for the Mercedes Sprinter from 2018 onwards.
What material is the Sprinter bumper protector made from?
All available versions are made from 1.5 mm aluminium.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
Do I need to drill into the bumper for installation?
No. The protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Can I use the protector to cover an already scratched bumper?
Yes. If the scratches or damage are located within the area covered by the bumper protector, they can be concealed underneath the aluminium cover.
What is the purpose of the folded edge?
The folded edge extends the coverage from the upper surface to the adjoining section of the loading edge. This increases the area of the bumper covered by the protector.
Which aluminium finish should I choose?
All available versions are made from 1.5 mm aluminium, so the choice can primarily be based on your preferred appearance – for example classic chequer plate, a brushed stainless-steel look or a silver or black anodised surface with machined grooves.
What should I check before fitting the protector?
Please read the installation instructions under “Technical Details” completely before installation and follow the specified requirements when fitting the protector.
Protecting the Mercedes Sprinter loading edge for everyday use
For many businesses, the Mercedes Sprinter from 2018 onwards is a working vehicle that will be loaded and unloaded regularly for years. That makes it worthwhile to consider heavily used contact areas before obvious signs of wear have developed.
The vehicle-specific 1.5 mm aluminium rear bumper protector covers the exposed section of the rear bumper, features a folded edge and can be installed using the special adhesive tape on the rear without drilling or screws.
With six different aluminium finishes available, you can also decide whether your Sprinter should have a classic functional chequer plate appearance, a more understated stainless-steel look or a silver or black anodised finish.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
