The HTE Series center-mounted stainless steel rear step for the Fiat Ducato, Citroën Jumper, and Peugeot Boxer (model year 2006 and later) makes it easier to access the cargo area on a daily basis and ensures greater safety when loading and unloading. Especially for vans with a high loading sill, this sturdy rear step provides stable and comfortable access to the rear of the vehicle.
Rear Step for Fiat Ducato / Jumper / Boxer – a brief overview:
The HTE Series stainless steel rear step is mounted centrally under the bumper and makes it easier to access the cargo area of the Fiat Ducato, Citroën Jumper, and Peugeot Boxer. Thanks to its slip-resistant tread, robust stainless steel construction, and easy installation, it is ideal for tradespeople, courier services, and commercial vehicles.
Stainless steel rear step for Fiat Ducato, Citroën Jumper, and Peugeot Boxer
This robust rear step for vans was specially developed for vehicles with a high loading sill. Its central mounting below the bumper enables particularly ergonomic access to the cargo area. Especially when frequently accessing tools, packages, or materials, the step significantly reduces the strain of getting in and out.
The construction is made of high-quality stainless steel and impresses with its high stability combined with a low weight. The open profile of the step surface also ensures a secure grip—even in wet conditions or with dirty shoes.
Suitable for many vehicle models
The HTE Series stainless steel rear step is suitable for a wide range of van sizes. It fits the Fiat Ducato, Citroën Jumper, and Peugeot Boxer models manufactured in 2006 or later and can be installed on all wheelbases from L1 to L5.
Technical specifications of the HTE series rear step
| Feature |
Specification |
| Width |
740 mm |
| Depth |
180 mm |
| Load capacity |
100 kg |
| Material |
Stainless steel |
| Vehicles |
Fiat Ducato, Citroën Jumper, Peugeot Boxer |
| Model year |
from 2006 |
| Wheelbases |
L1 – L5 |
| Installation position |
Rear center |
Note for vehicles with parking sensors
On vehicles equipped with standard parking sensors, the two inner sensors must be covered with tape, as they may be affected by the installed step. The outer sensors remain active and continue to assist with maneuvering.
Advantages of the stainless steel rear step
The robust construction ensures a reliable entry aid for daily vehicle use. The step offers a significant increase in convenience, especially during frequent loading and unloading.
-
Facilitates access to the cargo area
-
Non-slip tread surface thanks to open profile
-
Durable stainless steel construction
-
Sturdy construction for daily use
-
Mounts centrally under the bumper
-
Suitable for many van models
Difference from trailer hitch steps
While some entry aids are mounted directly on the trailer hitch, this rear step is firmly positioned below the bumper. This keeps the trailer hitch fully accessible, and entry is ergonomically facilitated via the center of the vehicle.
A center-mounted rear step is therefore particularly convenient, especially for vans that are regularly loaded through the rear doors.
Conclusion: Practical entry aid for Ducato, Jumper, and Boxer
The HTE Series stainless steel rear step is a durable and practical solution for vans with a high loading sill. Thanks to its sturdy construction, slip-resistant surface, and easy installation, it significantly improves access to the cargo area while enhancing safety during daily work.
This makes it an ideal addition for tradespeople, delivery services, service vehicles, and all vans that are regularly loaded and unloaded through the rear.
Frequently Asked Questions About the Rear Step for Ducato, Jumper, and Boxer
Which vehicles is the rear step suitable for?
The step fits the Fiat Ducato, Citroën Jumper, and Peugeot Boxer from model year 2006 onward and can be installed on all wheelbases from L1 to L5.
Can the step be used on vehicles with a trailer hitch?
Yes. Since the step is mounted centrally under the bumper, the trailer hitch remains usable.
What is the maximum load capacity?
The maximum load capacity of the rear step is 100 kg, making it suitable for daily access to the cargo area.
What should be considered for vehicles with parking sensors?
If parking sensors are present, the two inner sensors should be covered with tape. The outer sensors remain active.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers