Those who regularly use their Citroën Berlingo III on construction sites, for assembly work, or for service calls will benefit from additional roof storage space. The KammRack aluminum roof rack from Rhino was developed for vehicles built in 2018 or later and combines an aerodynamic design with high stability and durable aluminum quality—ideal for frequent drivers who are looking for a reliable transport solution with low noise levels.
Technical data & important product information
-
System: Rhino KammRack (roof basket/roof platform solution for professional use)
-
Material: Galvanized, corrosion-resistant aluminum
-
Installation height: approx. 24 cm from the top edge of the roof
-
Assembly time: approx. 35–45 minutes
-
Safety standard: 20 g crash-tested in accordance with ECE 17.07
-
Installation type: Mounting at factory-installed fixing points – no drilling required
Scope of delivery:
✔ KammRack aluminum roof rack system
✔ Rear rollers across the entire width of the rack (standard)
✔ Mounting feet for original fixing points
✔ Mounting material
✔ Mounting instructions/mounting plan (under "Technical details")
The integrated rear rollers make it much easier to slide long items such as ladders or pipes onto the rack. Compared to systems without rollers, the load is guided more evenly and the roof is better protected during loading.
Vehicle compatibility & dimensions
The roof rack is available for the Citroën Berlingo III from 2018 in two wheelbase variants. The roof basket sizes are designed to fit the respective vehicle version.
📏 Compatible vehicle sizes – Citroën Berlingo III (from 2018)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Wing doors |
2,785 mm |
4,403 mm |
1,844 mm |
2.2 m × 1.25 m |
| L2H1 |
Swing doors |
2,975 mm |
4,753 mm |
1,844 mm |
2.6 m × 1.25 m |
Note: Vehicle length under item 18, vehicle height under item 20, and year of manufacture under item 6 in the vehicle registration document (Germany).
Installation at factory-fitted fixing points
Installation is carried out using the original fixing points in the vehicle roof. The screw connection points to which the carrier feet are attached are located under the plastic covers. The complete installation plan can be viewed under "Technical details."
Features & advantages in everyday use
-
Sturdy roof rack made of galvanized aluminum
-
Aerodynamic design for reduced wind noise
-
Rear rollers included (significantly easier loading)
-
Flexibly positionable crossbars along the guide rails
-
Assembly in approx. 35–45 minutes
-
20 g crash-tested in accordance with ECE 17.07
- Significantly increases the transport volume of the Berlingo
Application profile – for whom is KammRack particularly worthwhile?
The Berlingo is often used as a compact commercial vehicle. Depending on the use, there are different advantages:
-
Trades: Ladders, profiles, toolboxes – roof rack offers many lashing points
-
Service: Regular highway driving – aerodynamic design supports a smoother ride
-
Leisure: Sporadic transport – low weight and corrosion-resistant design
Aerodynamics comparison – why this is noticeable in the Berlingo
With compact high-roof station wagons, angular carriers can become audible more quickly. Compared to simple, straight crossbars, the shape of the cross tubes is flow-optimized – this reduces air turbulence and ensures a more pleasant noise level, especially on frequent highway sections.
Material comparison – aluminum vs. steel (for compact commercial vehicles)
Weight is an important issue, especially with the Berlingo: a lightweight roof rack leaves more room for payload and handling.
⚖️ Comparison: aluminum system vs. steel rack
| Criterion |
Aluminum (KammRack) |
Steel |
| Handling |
Lighter – easier to assemble and move |
Heavier |
| Corrosion |
Highly resistant to weather conditions |
Coating is crucial |
| Continuous operation |
Low maintenance in everyday use |
Inspection/protection advisable |
| Everyday use on long journeys |
Often quieter thanks to aerodynamic design |
Significantly more audible depending on design |
Roof basket vs. cross bars – which is better suited to the Berlingo?
Cross bars are often intended for roof boxes. A roof basket system such as KammRack, on the other hand, offers more flexibility for commercial use:
- More support surface for irregular loads
- Many fixing points for straps and accessories
- Better load distribution for ladders and profile material
- Can be expanded with accessories to create a complete transport setup
Why Rhino instead of cheaper roof racks?
Inexpensive roof racks often focus purely on transport – not everyday practicality. Rhino focuses on tested safety and a design that is geared towards professional use.
-
Fixed point mounting instead of universal compromise fastenings
-
TÜV/20 g testing as a safety basis
-
Rear rollers as standard for fast and gentle loading
-
Modular expandability with professional accessories
-
Robust aluminum quality for long-term use
Optional accessories for even more transport options
The roof rack can be adapted to your specific application with extensions:
-
Transport tube – Porte Tube Pro: Long goods transport, lockable steel front wall, load capacity 50 kg, 20 g tested
-
Safe Clamp ladder clamp: up to 5× faster than conventional fastenings, TÜV GS tested, incl. locks
-
LadderStow ladder holder: ergonomic loading and unloading of 1–3-piece ladders
Conclusion
The KammRack aluminum roof rack for Citroën Berlingo III from 2018 onwards is a durable, quiet, and practical solution for anyone who uses the Berlingo regularly in their everyday work. Thanks to rear rollers, fixed-point mounting, and tested safety, the system is a professional alternative to simple crossbar solutions.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
