The aluminum roof rack for Fiat Ducato models built from 2006 onwards is a professional transport solution for tradespeople, service providers, and logistics companies. The aerodynamically shaped crossbars make the system particularly suitable for vehicles that are frequently used on highways: less air turbulence, a more pleasant noise level, and a robust roof loading area for long items, ladders, and bulky materials.
Technical data & important product information
-
Vehicle: Fiat Ducato from 2006 onwards
-
Material: galvanized, corrosion-resistant aluminum
-
Installation time: approx. 35–45 minutes
-
Safety standard: 20 g crash tested according to ECE 17.07
-
Installation height: approx. 24 cm from the top edge of the roof
-
Cross tubes: can be freely positioned along the rail
-
Rear doors: suitable for vehicles with hinged doors (according to table)
Scope of delivery:
✔ Aluminum roof rack system
✔ Rear rollers for easier loading (included as standard, across the entire width)
✔ Mounting feet & mounting material
✔ Installation instructions (under "Technical details")
The standard rear rollers make it easier to slide ladders, pipes, or long profiles onto the roof rack—particularly practical if the roof rack is used daily. Compared to roof racks without rollers, loading is more controlled and gentler on the material.
Suitable vehicle sizes – Fiat Ducato
📏 Vehicle dimensions & roof basket sizes – Fiat Ducato (from 2006)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Wing doors |
3,000 mm |
4,963 mm |
2,254 mm |
3.2 m × 1.7 m |
| L2H1 |
Swing doors |
3,450 mm |
5,413 mm |
2,254 mm |
3.2 m × 1.7 m |
| L2H2 |
Swing doors |
3,450 mm |
5,413 mm |
2,524 mm |
3.2 m × 1.7 m |
| L3H2 |
Swing doors |
4,035 mm |
5,998 mm |
2,524 mm |
3.8 m × 1.7 m |
| L3H3 |
Swing doors |
4,035 mm |
5,998 mm |
2,764 mm |
3.6 m × 1.6 m |
| L5H2 |
Swing doors |
4,035 mm |
6,363 mm |
2,524 mm |
4.2 m × 1.7 m |
| L5H3 |
Swing doors |
4,035 mm |
6,363 mm |
2,764 mm |
4.2 m × 1.6 m |
Note: You will find the vehicle length in the vehicle registration document under point 18, the vehicle height under point 20 and the year of manufacture under point 6 (applies to German vehicle registration documents).
Installation of Rhino aluminum roof racks
The aluminum roof rack from Rhino Products is mounted at the fixing points provided by the vehicle manufacturer. Plastic caps are visible on the roof – the mounting points are located underneath them. After removing the caps, the mounting feet are screwed in place. You can view or download the installation plan under "Technical Details."
Features of the aluminum roof racks
- Sturdy roof rack made of galvanized aluminum
- Aerodynamic crossbars – quieter than many standard solutions
-
Rear rollers included in delivery – across the entire width
- Cross bars can be moved freely for flexible loading
- Easy to install
- Significant increase in transport volume
- Suitable for hinged doors (according to table)
- Can be combined with many accessories
Application profile – what the roof basket is particularly suitable for
-
Crafts & construction: ladders, wooden slats, rails, pipes, cable ducts
-
Service & assembly: frequent highway driving – aerodynamic design for greater driving comfort
-
Transport & logistics: additional roof loading space when the cargo area is already fully utilized
Aerodynamics comparison – Rhino vs. inexpensive, angular roof racks
On large panel vans such as the Ducato, roof structures have a particularly strong effect on wind noise. Compared to simple, angular crossbars, the tubular shape is designed for a smoother airflow. This can be particularly noticeable on longer highway journeys, where it results in a more pleasant noise level.
Material comparison – aluminum vs. steel for Ducato fleets
⚖️ Aluminum or steel – differences in tough everyday working conditions
| Criterion |
Aluminum roof rack |
Steel beam |
| Dead weight |
Lightweight – easier to handle and reduces additional weight |
Heavier |
| Corrosion protection |
Very high – ideal for year-round operation |
Coating crucial |
| Long-term use |
Low maintenance in continuous use |
Requires intensive care in case of damage |
| Noise |
Often quieter due to profile |
Highly dependent on design |
Roof basket vs. cross bars – why the roof basket often has the advantage in commercial use
A roof basket is particularly useful if you frequently transport bulky or varying loads. Compared to individual cross bars, you benefit from more contact surface, more securing points, and better load distribution – especially for ladders, pipes, or sheet material.
Why Rhino instead of cheaper roof racks?
Reliability counts in fleet operations. Cheap universal carriers often cut corners when it comes to fit, fastening, and comfort details. Rhino relies on a system that is designed for regular use – including safety tests and practical loading aids.
-
TÜV-tested & 20 g according to ECE 17.07
-
Rear rollers as standard – faster, controlled loading
-
Flexible crossbar positioning for varying loads
-
Corrosion-resistant aluminum for year-round use
-
Expandable with professional accessories
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack:
Transport tube – Porte Tube Pro
An aerodynamic transport tube for transporting long items on the roof rack. Profile end caps reduce air resistance, while the aluminum construction offers high stability and low weight.
- Quick installation in just 15 minutes
- Maximum load capacity of 50 kg
- Lockable steel front wall for added security
- Safety approved & crash tested at 20 g
- Installation without drilling
Ladder clamp – Safe Clamp
Up to 5× faster than standard ladder clamps, TÜV GS & 20 g crash tested, suitable for up to 4 nested ladder sections. Anti-theft locks are included.
LadderStow ladder holder
Ergonomic solution for loading and unloading ladders for light commercial vehicles. Made of anodized aluminum, suitable for up to 3-piece ladders.
Walkway / platform
Makes it easier to load bulky items onto the vehicle roof. The necessary mounting hardware is included.
Aluminum rear door ladder
Lightweight, sturdy ladder with non-slip steps – suitable for vehicles with wing doors. Mounting hardware is included.
- Lightweight – made of aluminum
- Non-slip rungs
- Includes mounting hardware
- Installation time: 30–45 minutes
Conclusion
The aluminum roof rack for Fiat Ducato from 2006 onwards is a durable, aerodynamic, and professional solution for everyday work. With rear rollers included, flexible crossbar positioning, and tested safety, the system is ideal for trade, service, and transport.
FAQ – Aluminum roof rack for Fiat Ducato from 2006 onwards
Which Fiat Ducato models is the roof rack suitable for?
The roof rack is designed for Fiat Ducato models from 2006 onwards. Please select the appropriate variant based on the designation (L1/L2/L3/L5 and H1/H2/H3) as well as the length (point 18), height (point 20), and year of manufacture (point 6) in the vehicle registration document.
Are rear rollers included in the scope of delivery?
Yes. The rear rollers are included as standard and extend across the entire width. This makes it easier to slide ladders, pipes, and long materials onto the rack.
Can I move the cross tubes?
Yes. The cross tubes can be flexibly positioned along the rail to adapt the support points and load securing to the goods being transported.
Do I have to drill holes for installation?
No. Installation is carried out at the factory-set fixing points under the plastic covers on the roof. Drilling is not necessary.
Is a tailgate ladder available for the Ducato?
Yes, an aluminum rear door ladder is available as an accessory. Important: Rear door ladders are only suitable for vehicles with hinged doors.
Which accessories are particularly useful for long loads?
The Porte Tube Pro is particularly popular for pipes and rod material. For ladder transport, Safe Clamp and LadderStow are practical additions to everyday work.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
