Side manual step for Ducato Jumper Boxer

Side manual step for Ducato Jumper Boxer

SKU: 101310
Category: Mechanical side step

Mechanical-automatic step with high load capacity

Abgasnorm:
Stufengröße

from

1.539,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
PDF (1)

Door-integrated side step for Fiat Ducato, Citroen Jumper, and Peugeot Boxer

The X3 step for the Fiat Ducato, Citroen Jumper, and Peugeot Boxer is developed, designed, and produced in Germany.
A fully automatic but mechanical step!

The step is suitable for the

following vehicle sizes: Wheelbase = 3,450 mm with a cargo area length = approx. 3,120 mm/total vehicle length: 5
,413 mm Wheelbase = 4,035 mm with a cargo area length = approx. 3,705 mm/total vehicle length: 5,998 mm
Wheelbase = 4,035 mm with a cargo area length = approx. 4,070 mm/total vehicle length: 6,363 mm

Width:	1,000/1,200 mm
Depth:	300 mm
Load capacity:	350 kg
Vehicle:	Ducato, Jumper, Boxer
Step function:	Mechanical
Year of manufacture:	From 2006 onwards
Wheelbase length:	from L2
Wheelbase from:	3,450 and 4,035 mm

Technical advances guarantee maximum slip resistance (R13), and the duplex coating leaves rust
no chance.
The closed design provides optimum protection for the mechanics.
The combined door function leaves no room for compromise, as the step can be easily extended and retracted.

The KTL coating is characterized by very good corrosion resistance, even in cavities and on sharp edges
. Passivation during pre-treatment significantly increases corrosion protection.

The advantages of the step at a glance

- Tested stone chip resistance according to DIN 55996-1
- Resistant to aggressive acids and alkalis
- Hard surface-
Additional duplex coating of the cassette possible (powder coating in RAL colors)
- Resistant to stone chips and salt
water - Salt spray test according to DIN ISO 9227 up to 1000 hours
- Coating
according to automotive standard - Slip resistance R13 according to DIN 51130
- Displacement space V04 according to
DIN 51130 - High abrasion resistance (aluminum oxide grain)
- UV resistant and temperature
stable - Resistant to chemicals (oil, brake fluid, etc.) - Classification
C according to DIN
51097 - Tested for 1 million walk-throughs

Maintenance and care

- Maintenance-free plain bearings made of tribopolymer
- Closed cassette protects the mechanism from external influences
-
Lubricant-free - High dirt resistance -

Corrosion-free - Very good
media resistance - If necessary, bearings can be replaced very easily (clip bearings)

Item information	Value
vehicle:	Fiat Ducato Citroën Jumper Peugeot Boxer

Installation instructions for mechanical step X3

Installation instructions for the side mechanical step on the Fiat Ducato, Citroen Jumper, and Peugeot Boxer

Installation instructions for automatic mechanical steps on Fiat Ducato, Citroen Jumper, and Peugeot Boxer models built in 2006 or later.

Installation instructions for mechanical step X3

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr