Black steel roof rack for MB Sprinter - L1H2
The black roof rack for the Mercedes Sprinter from 2006 (type 906) and 2018 (type 907+910) onwards, with a short wheelbase - L1 - 3,250 mm or 3,259 mm and high roof H2, is made of powder-coated steel.
Roof racks significantly expand the storage space of your van. This makes it possible to transport more goods or tools and use the cargo space more effectively.
The scope of delivery includes the mounting feet for installation at the fixed points or on the C-rail in the vehicle roof and the front spoiler to reduce driving noise.
The installation time with 2 people is approx. 45 minutes.
The load capacity approved by the vehicle manufacturer is 150 kg. However, the tested load capacity of the roof rack is up to 180 kg.
Suitable for wheelbase L1 of 3,250 or 3,259 mm and a total vehicle length of 5,245 or 5,267 mm:
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H2 |
Front-wheel drive W910 |
3,259 mm |
5,267 mm |
2,781 mm |
2,800 x 1,580 mm |
| L1H2 |
Rear-wheel drive W906/907 |
3,250 mm |
5,245 mm |
2,725 mm |
2,800 x 1,580 mm |
Note: You will find the vehicle length in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
The features of the roof rack in detail
The basic equipment already includes the mounting feet and front spoiler.
The workmanship is high quality and, with its improved aerodynamic design, the roof rack saves fuel and generates less noise when driving at speed.
The system is robust and ideally suited for intensive use.
Thanks to the innovative mounting system, the crossbars can be inserted and positioned flexibly.
With the well-designed screw system, the roof rack can be mounted in no time.
The manufacturer offers a two-year corrosion protection warranty against rusting through.
Thanks to the powder-coated surface, the roof rack is rust-free and very durable when treated properly and without damaging the powder coating.
Features at
a glance - Basic equipment includes
mounting feet and front spoiler - High quality with aerodynamically improved design for lower fuel consumption and less noise
- Robust system - For intensive use
- Innovative mounting system - Quick to install by sliding in the crossbars and using
the sophisticated screw system- 2-year corrosion protection warranty - Stainless steel thanks to special surface treatment
- Can be expanded with extensive accessories
Optional accessories for the Cruz roof rack
The roof rack can be expanded with a wide range of accessories, including components from other manufacturers such as Rhino Products. Expandable accessories
include: ladder holders, load securers for fastening with lashing straps, transport tubes or, depending on the vehicle, a tailgate ladder.
All accessories are supplied with the appropriate mounting materials where necessary.
Load securing restraints
The four 10 cm high load securing restraints are limiters that prevent the goods being transported from rolling back and forth. Lashing straps
can also be attached to the load securing restraints to secure the load.
Ladder
holder The ladder holder makes it possible to secure ladders quickly and easily without the hassle of lashing straps.
Ladders with up to 4 sections can be transported.
The scope of delivery consists of one pair and always includes two ladder clamps for the front and rear.
The dead weight is: 2.5 kg
Loading
roller/ladder roller The loading roller makes it easier to load and unload long, bulky goods. The loading rollers are
available for all vehicle types with wing doors or double doors. Unfortunately, they
cannot be installed in vehicles with tailgates, as the tailgate would hit the loading roller when opened.
Transport tube
The aluminum transport tube is suitable for transporting long goods, such as copper pipes or roof battens. The transport tube
is available in lengths of 2 m, 3 m, and 4 m. There are closable openings at the ends.
Alternatively, the Rhino transport tube can also be mounted up to a length of 5 m.
Walkway
The walkway is suitable for walking on the roof rack.
It is easily and simply attached to the crossbars with clamps. Several
sections are supplied for longer vehicles.
Rear door ladder
The black rear door ladder makes it easier to load and unload the roof rack. This makes it easier
to load bulky items or fill the transport tube.
Installation of Cruz roof racks
The Cruz roof rack is mounted on the fixing points specified by the vehicle manufacturer.
Plastic caps can be seen on the roof of your van. The fixing points are located underneath these caps.
These plastic caps are removed and the mounting feet are screwed into place. The
mounting feet must first be mounted on the roof rack. We will be
happy to send you the installation plan, or you can view it under "Technical Details."
Cruzber
Pol. Ind. Las Salinas II, parc. 12
14960 Rute (Córdoba) Spain
Spanien
info@cruzber.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
