Window guards for Toyota Pro Ace
Window protection grilles for the rear doors/hinged doors/double doors of the Toyota ProAce are available for vehicles
built in 2016 or later, for burglary prevention and protection against mechanical damage from inside and outside.
The window protection grilles are suitable for vehicles with tailgates or swing doors/double doors.
The protection grille is suitable for the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Cargo area height |
| L1H1 |
Double doors |
2,925 mm |
4,609 mm |
1,935 mm |
1,397 mm |
| L1H1 |
Tailgate |
2,925 mm |
4,609 mm |
1,935 mm |
1,397 mm |
| L2H1 |
Double doors |
3,275 mm |
4,959 mm |
1,935 mm |
1,397 mm |
| L2H1 |
Tailgate |
3,275 mm |
4,959 mm |
1,935 mm |
1,397 mm |
| L3H1 |
Double doors |
3,275 mm XL |
5,309 mm |
1,935 mm |
1,397 mm |
| L3H1 |
Tailgate |
3,275 mm XL |
5,309 mm |
1,935 mm |
1,397 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
The driver's visibility remains good thanks to the 25x35 mm mesh openings, while visibility from the outside is severely restricted.
Foam rubber is attached to the edges to protect the paintwork from scratches and prevent vibrations in the vehicle interior.
The window protection grille is made of sturdy steel tube mesh with perforated steel sheet.
The surface is powder-coated in black.
The scope of delivery includes two window protection grilles, one for each door, and the mounting materials.
Installation of the window protection grilles
The window protection grilles are manufactured to fit both rear doors or the wing doors ex works.
The fastening points on the window protection grille must be bent at the perforated points to match the door frame.
Don't worry, bending them is child's play.
Before installation, the points for the drill holes must be marked. Then drill the holes in the door frame.
The felt strip supplied is glued to the bent surfaces. This prevents noise transmission and vibrations in the vehicle interior.
Please clean the windows before finally installing the window grilles.
As a final step, screw the window protection grille in place using the screws supplied.
Features of the window protection
grille - Steel, black
powder-coated - Protection against break-ins and theft
- Large grid for good rear visibility
- Protects the windows from slipping loads
- Quick and easy installation thanks to predefined
mounting points - Available for sliding doors, rear doors, and
tailgates - Custom-made for every delivery van
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers