The aluminum roof rack for Citroën Jumpy III and Citroën SpaceTourer models built in 2016 or later is a particularly practical solution if you regularly need to transport ladders, pipes, or bulky equipment on the roof of your vehicle. The aerodynamic design makes the system ideal for frequent highway driving: less wind noise, reduced air resistance, and a more comfortable driving experience in everyday use.
Product description – Galvanized aluminum roof rack
The roof rack consists of a robust, corrosion-resistant roof basket made of galvanized aluminum and is designed for professional continuous use. The crossbars are shaped to reduce wind noise and direct the airflow more favorably, making the roof rack significantly quieter than many classic systems.
The rear rollers for easy loading are included in the scope of delivery. They extend across the entire width of the roof rack and make it much easier to load and unload long items.
The crossbars can be flexibly positioned along the rail and can therefore be optimally adapted to your individual requirements. Installation usually takes approx. 35–45 minutes.
The roof rack is TÜV-approved and crash-tested to 20 g in accordance with ECE 17.07. The height is approx. 24 cm (from the top edge of the roof to the top edge of the roof rack).
Suitable for the following vehicle sizes
The roof rack is suitable for the following variants of the Citroën Jumpy III and Citroën SpaceTourer:
📏 Vehicle variants – Peugeot Expert III & Traveller (aluminum roof rack)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Double doors |
2,925 mm |
4,609 mm |
1,935 mm |
2.2 m x 1.4 m |
| L1H1 |
Tailgate |
2,925 mm |
4,609 mm |
1,935 mm |
2.0 m x 1.4 m |
| L2H1 |
Double doors |
3,275 mm |
4,959 mm |
1,935 mm |
2.6 m x 1.4 m |
| L2H1 |
Tailgate |
3,275 mm |
4,959 mm |
1,935 mm |
2.4 m x 1.4 m |
| L3H1 |
Double doors |
3,275 mm XL |
5,309 mm |
1,935 mm |
3.0 m x 1.4 m |
| L3H1 |
Tailgate |
3,275 mm XL |
5,309 mm |
1,935 mm |
2.8 m x 1.4 m |
Note: You will find the vehicle length in the vehicle registration document under point 18, the vehicle height under point 20, and the year of manufacture under point 6 (applies to German vehicle registration documents).
Installation – use fixed points on the vehicle roof
The aluminum roof rack from Rhino Products is mounted on the fixed points provided by the vehicle manufacturer. Plastic caps are visible on the roof – the mounting points are located underneath them. The caps are removed and the mounting feet are screwed in place. The feet are first mounted on the roof rack.
You can view or download the installation plan in advance under "Technical Details."
Advantages in daily use
-
Aerodynamic cross bars for less wind noise
-
Sturdy roof rack made of galvanized aluminum
-
Rear rollers included for convenient loading
-
Flexible positioning of the cross bars along the rail
-
TÜV-approved and crash-tested to 20 g in accordance with ECE 17.07
- Available for tailgates and wing doors
-
Significant increase in transport volume
Optional accessories for even greater utility
With the right accessories, the roof rack can be optimally expanded for your everyday work:
Transport tube – Porte Tube Pro: Aerodynamic transport tube for long items on the roof. Profiled plastic end caps ensure low air resistance. High stability with low weight, quick installation (approx. 15 minutes), load capacity up to 50 kg, lockable steel end wall, 20 g crash tested, installation without drilling.
Ladder clamp – Safe Clamp: Up to 5× faster than standard ladder clamps, TÜV GS and 20 g crash-tested, suitable for up to 4 nested ladder sections. Anti-theft locks are included.
LadderStow ladder holder: Ergonomic solution for loading and unloading ladders from light commercial vehicles. Made of anodized aluminum, suitable for quickly securing ladders with up to 3 sections.
Walkway/platform (L3 only): Makes it easier to load bulky goods and work on the roof. Mounting hardware is included.
Aluminum rear door ladder (wing doors only): Lightweight and sturdy, non-slip steps, including mounting hardware. Installation time approx. 30–45 minutes.
Conclusion
The aluminum roof rack for Citroën Jumpy III and SpaceTourer from 2016 combines a quiet, aerodynamic design with high stability and tested safety. Thanks to rear rollers, flexible crossbar positioning, and extensive accessories, the system is a professional solution for trade, service, and transport.
FAQ – Aluminum roof rack for Citroën Jumpy III & SpaceTourer from 2016
Does the aluminum roof rack also fit the Citroën SpaceTourer in the passenger car version?
Yes, the aluminum roof rack is suitable for the Citroën SpaceTourer from 2016 onwards, provided that the fixing points are available on the roof. When selecting, please note the appropriate vehicle length (L1/L2/L3) and the variant with tailgate or wing doors.
How does the aerodynamic shape really benefit me in everyday use?
The aerodynamically shaped crossbars are designed for better airflow. This can reduce wind noise and makes for a more comfortable driving experience, especially on longer highway journeys – particularly when compared to angular roof rack designs.
How can I find out for sure whether I am driving an L1, L2, or L3?
The most reliable way is to check your vehicle registration document: you will find the vehicle length under item 18, the vehicle height under item 20, and the year of manufacture under item 6 (applies to German vehicle registration documents). This will help you choose the right roof basket size.
Can I arrange the crossbars for roof boxes, pipes, or ladders in different ways?
Yes, the cross tubes can be positioned variably along the rail. This allows you to optimize the setup depending on the intended use – e.g., more space for long ladders or a more compact arrangement for boxes and tool crates.
Is it possible to load from the rear on your own?
In many cases, yes: the integrated rear rollers make it easier to slide long items such as ladders or pipes onto the rack because they do not have to be pulled over edges. This makes loading easier, especially if you often work alone.
Which accessories are particularly useful for trades and service?
For typical trades applications, the Porte Tube Pro (long goods transport), the Safe Clamp (quick ladder securing) and the LadderStow (convenient loading and unloading) are particularly popular. For L3 vehicles, a platform can also facilitate the handling of bulky loads.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
