The Toyota ProAce Max from 2024 onwards is a large commercial van designed for demanding transport jobs and generous cargo capacity. With a new working vehicle in particular, it makes sense to protect heavily used areas right from the start – including the two wheel arches projecting into the cargo area.
This set of two vehicle-specific wheel arch covers made from 3 mm ABS plastic provides additional protection for the left and right wheel arches against direct contact with toolboxes, transport containers, parcels and other cargo. The plastic covers can be used on their own or integrated into an existing or planned cargo area conversion.
Do these wheel arch covers fit the Toyota ProAce Max from 2024?
In short: Yes. This set is designed for the Toyota ProAce Max from 2024 onwards. It includes two wheel arch covers for the left and right sides, made from 3 mm flexible, UV-resistant ABS plastic. Depending on the installation situation, the covers can be clamped, screwed or bonded in place.
Good to know:
The ProAce Max should not be confused with the smaller Toyota ProAce or ProAce City. When choosing the correct wheel arch covers, make sure your vehicle is specifically the ProAce Max.
Wheel arch protection for Toyota's large commercial van
The ProAce Max expands Toyota's commercial vehicle range with a large van designed for substantial transport requirements. Depending on the vehicle configuration, different lengths and heights are available, making the ProAce Max suitable for a wide variety of commercial applications.
Whatever the job, however, the wheel arches remain two areas that project noticeably into the usable cargo space. During everyday loading and unloading, they can therefore come into frequent contact with cargo.
The ABS covers are fitted over these areas and create an additional protective layer between the original vehicle structure and the load.
New van, new conversion – protect the wheel arches from the start
With a current-generation commercial vehicle such as the ProAce Max, it makes sense to include cargo area protection in the initial conversion plan rather than treating it as an afterthought.
If you are planning a cargo floor, side wall lining, shelving or other vehicle installations, the wheel arch covers can be incorporated into the overall layout from the beginning.
This has a practical advantage: transitions between the floor, side walls and wheel arches can be considered before the final installation is completed, instead of having to fit additional protection around existing equipment later.
3 mm ABS plastic for everyday commercial vehicle use
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible enough for the shaped vehicle covers while being suitable for regular use inside a working van.
The ABS material is also UV-resistant.
These covers are designed specifically to protect the wheel arch areas. They do not replace a cargo floor or side wall lining and do not perform any load-securing function.
Technical specifications – Toyota ProAce Max wheel arch covers
Toyota ProAce Max Wheel Arch Covers from 2024 – Product Specifications
| Specification |
Details |
| Vehicle |
Toyota ProAce Max |
| Model year |
From 2024 onwards |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Who benefits most from additional wheel arch protection?
As a large commercial van, the ProAce Max is suitable for many different working environments. Wherever the cargo area is regularly used to its full potential, the projecting wheel arches are particularly exposed.
Typical applications include:
-
Trade and installation businesses carrying tools and materials
-
Delivery and logistics companies with frequently changing cargo
- Service and maintenance vehicles
-
Fleet vehicles covering high annual mileages
-
Workshop and conversion vans with additional interior equipment
Plan wheel arch covers, flooring and side walls together
When converting the cargo area of a new ProAce Max, it is worth looking beyond individual surfaces. The floor, side walls and wheel arches perform different protective functions and can be combined as part of a complete cargo area protection concept.
Planning Cargo Area Protection for the Toyota ProAce Max
| Area |
Suitable protection |
Main purpose |
| Wheel arches |
ABS wheel arch covers |
Protection for projecting vehicle areas |
| Cargo floor |
Cargo floor |
Protection against everyday loading and unloading wear |
| Vehicle sides |
Side wall lining |
Protection for larger interior wall surfaces |
The wheel arch covers can also be used independently of a complete cargo area conversion and added later if required.
Clamp, screw or bond – installation to suit your conversion
Depending on the installation situation, the wheel arch covers can be clamped, screwed or bonded in place.
With a completely new conversion, installation can be coordinated with the cargo floor and wall lining from the outset. If the cargo area is already equipped, it is worth checking which fixing method can best be integrated with the existing components.
Installation note:
The required installation hardware is not included. Fixings or adhesive must be selected according to the chosen installation method and the existing cargo area conversion.
Practical tip: fit wheel arch protection before shelving and equipment
If you are planning to install shelving systems, workshop equipment or other fixed components in your ProAce Max, it is worth considering the wheel arch covers first.
Although the covers can generally be retrofitted, permanently installed equipment may make access to the wheel arches more difficult. With a new vehicle, it therefore makes sense to decide which areas require protection before positioning the remaining equipment.
This can save unnecessary dismantling later – and is usually a lot easier than trying to persuade a shaped plastic cover to disappear behind half a workshop shelving system. 😄
Frequently asked questions about Toyota ProAce Max wheel arch covers
Which Toyota model are these wheel arch covers designed for?
The set is designed for the Toyota ProAce Max from 2024 onwards.
Do these covers also fit the Toyota ProAce or ProAce City?
This product is specifically designed for the ProAce Max. For the Toyota ProAce and ProAce City, please use the wheel arch covers specified for those models.
What is included in the set?
The set includes two wheel arch covers for the left and right wheel arches.
Can the wheel arch covers be integrated into an existing cargo area conversion?
Yes. The wheel arch covers can also be added to an existing interior lining, provided that the installation situation allows them to be fitted correctly.
How thick is the ABS plastic?
The covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
How are the wheel arch covers installed?
Depending on the installation situation, the covers can be clamped, screwed or bonded in place.
Is installation hardware included?
No. The required installation hardware is not included.
Prepare your ProAce Max for everyday working life from day one
As Toyota's large commercial van, the ProAce Max from 2024 onwards provides plenty of space for commercial transport and vehicle conversion concepts.
With these vehicle-specific 3 mm ABS wheel arch covers, the two wheel arches projecting into the cargo area can be incorporated into your overall protection plan. The set includes both sides and can be used independently or together with cargo flooring and side wall lining.
Especially with a new working van, protecting these exposed areas early makes sense – before toolboxes, parcels and machinery start adding their own personal patina to the cargo area.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
