The Peugeot Partner and Citroën Berlingo from 2008 to 2018 are compact commercial vehicles where every usable centimetre of cargo space matters. Toolboxes, parcels, equipment and materials are therefore often positioned close to the projecting wheel arches.
This set of two vehicle-specific wheel arch covers made from 3 mm ABS plastic provides additional protection for the left and right wheel arches against direct contact with cargo. The covers are designed for vehicles with short and long wheelbases and can also be added to an existing cargo area conversion.
Do these wheel arch covers fit my Peugeot Partner or Citroën Berlingo?
In short: This set is designed for the Peugeot Partner and Citroën Berlingo from 2008 to 2018 with a short or long wheelbase. It includes two wheel arch covers for the left and right sides, made from 3 mm flexible and UV-resistant ABS plastic.
2008–2018 or the newer generation from 2018 – choose the correct version
For the Peugeot Partner and Citroën Berlingo, the model year and vehicle generation are particularly important when selecting the correct wheel arch covers.
This product is intended for the vehicle generation produced from 2008 to 2018. The subsequent K9 generation uses a different vehicle platform, which is why separate wheel arch covers are available for the newer models.
Which wheel arch covers do I need?
| Vehicle |
Generation / model year |
Correct product page |
| Peugeot Partner |
2008–2018 |
This product |
| Citroën Berlingo |
2008–2018 |
This product |
| Peugeot Partner III |
K9 from 2018 |
Go to newer version |
| Citroën Berlingo III |
K9 from 2018 |
Go to newer version |
For a vehicle registered in the transition year 2018, you should therefore not rely on the year alone. The important factor is which vehicle generation you actually have.
Wheel arch protection for compact commercial vehicles
The Partner and Berlingo are often used where a full-size van is not required – for trade work, customer service, courier operations or as compact service vehicles.
In these applications, the available cargo space is usually used very efficiently. Toolboxes, containers and materials may therefore be positioned close to the sides of the vehicle and directly beside the wheel arches.
The ABS covers create an additional protective layer between the cargo and the original wheel arch areas.
Short or long wheelbase – both versions are covered
According to the vehicle compatibility information, these wheel arch covers are suitable for versions with both a short and long wheelbase.
This allows the covers to be used with different body lengths within this vehicle generation. The key requirement remains that the vehicle is a Partner or Berlingo from the 2008–2018 generation.
3 mm ABS plastic for both wheel arches
The two covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant and is formed to fit over the existing wheel arches.
The covers provide an additional protective layer but do not replace a cargo floor or side wall lining and do not perform any load-securing function.
Technical specifications – Partner / Berlingo wheel arch covers
Peugeot Partner / Citroën Berlingo Wheel Arch Covers 2008–2018
| Specification |
Details |
| Vehicles |
Peugeot Partner / Citroën Berlingo |
| Model years |
2008–2018 |
| Wheelbase |
Short and long |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
A useful addition to an existing cargo area conversion
The wheel arch covers do not have to be installed as part of a completely new interior conversion.
They can also be fitted as an addition to existing cargo area lining. This can be useful if a cargo floor or side wall lining is already installed while the two wheel arches remain exposed.
Particularly in a compact commercial vehicle, this type of targeted retrofit can make sense because the entire cargo area does not need to be rebuilt simply to add protection around the wheel arches.
Installation by clamping, screwing or bonding
Depending on the existing interior equipment and installation situation, the wheel arch covers can be fitted by clamping, screwing or bonding.
In a vehicle with an existing conversion, check how the cargo floor, side wall lining and wheel arch covers meet before installation. With a new conversion, these transitions can be planned together from the start.
Installation note:
The required installation hardware is not included. Screws, adhesive or other fixings must be selected to suit the chosen installation method.
Practical tip for vehicles from 2018
The year 2018 deserves particular attention with the Partner and Berlingo because the previous and newer vehicle generations may overlap around this transition period.
If your vehicle documents show 2018, check the actual vehicle generation before ordering. The newer K9 generation requires the separate wheel arch covers designed for that vehicle platform.
So in this particular case, the model year is not quite the best detective – the vehicle generation provides the decisive clue. 😄
Frequently asked questions about Partner and Berlingo wheel arch covers
Which model years are these wheel arch covers designed for?
This set is designed for the Peugeot Partner and Citroën Berlingo from 2008 to 2018.
Do these covers also fit the newer generation introduced in 2018?
Separate wheel arch covers are available for the Peugeot Partner III and Citroën Berlingo III of the K9 generation from 2018. For vehicles from the transition year, the actual vehicle generation should therefore be checked before ordering.
Are the wheel arch covers suitable for short and long wheelbase models?
Yes. The available vehicle compatibility information lists both short and long wheelbase versions.
Are both wheel arch covers included?
Yes. The set includes two covers for the left and right wheel arches.
Can the wheel arch covers be retrofitted?
Yes. They can be added to existing interior lining, provided that the individual installation situation allows suitable fitting.
What material are the wheel arch covers made from?
The covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
Is installation hardware included?
No. The required installation hardware is not included.
Choosing the correct Partner or Berlingo generation matters
With this set, the two wheel arches of a Peugeot Partner or Citroën Berlingo from 2008 to 2018 can be specifically protected. The 3 mm ABS covers are suitable for short and long wheelbase versions and can also complement existing interior lining.
The particularly important point with these two vehicles is identifying the correct generation. Separate wheel arch covers are available for the newer Partner and Berlingo models introduced from 2018.
Checking both the model year and vehicle generation before ordering therefore takes you straight to the correct product – without discovering during installation that 2018 can occasionally have two answers to the same question.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers