When choosing wheel arch covers for the Ford Transit from 2014 onwards, checking the model alone is not enough. The drive configuration is particularly important: this set is specifically designed for vehicles with front-wheel drive (FWD).
The two vehicle-specific wheel arch covers made from 3 mm ABS plastic provide additional protection for the left and right wheel arches inside the cargo area. They help reduce direct contact with toolboxes, parcels, machinery and other cargo and can be used either on their own or as part of an existing cargo area conversion.
Do these wheel arch covers fit my Ford Transit from 2014?
In short: This set is designed for the Ford Transit from 2014 onwards with front-wheel drive (FWD). It includes two wheel arch covers for the left and right sides, made from 3 mm flexible and UV-resistant ABS plastic.
⚠️ Important before ordering:
✓ Ford Transit from 2014 onwards
✓ front-wheel drive (FWD) only
This product is not the intended version for vehicles with a different drive configuration.
Front-wheel drive is the key selection criterion for this Ford Transit
The model name alone is not sufficient when selecting this product. The important point is that your Transit is equipped with front-wheel drive.
Commercial vehicles can be available with different technical configurations, and relevant areas around the wheel arches and underbody may differ accordingly. Wheel arch covers should therefore always be selected according to the specific vehicle compatibility information.
For this product, the basic rule is simple: Transit from 2014 + FWD = the correct starting point.
Wheel arch protection for everyday commercial use
The Ford Transit is widely used as a trade van, delivery vehicle, service van or fleet vehicle. In these applications, the cargo compartment is often in constant use.
The wheel arches project into the usable cargo space and can therefore become regular contact points when boxes, tools, machinery or transport containers are moved around the vehicle.
The ABS covers are fitted over the existing wheel arches, creating an additional protective layer between the original vehicle area and the cargo.
3 mm ABS plastic for both wheel arches
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
The set includes two moulded covers – one for the left and one for the right wheel arch. This allows both exposed areas inside the cargo compartment to be protected.
The covers can be installed independently or incorporated into an existing or newly planned cargo area conversion.
Technical specifications – Ford Transit FWD wheel arch covers
Ford Transit Wheel Arch Covers from 2014 FWD – Product Specifications
| Specification |
Details |
| Vehicle |
Ford Transit |
| Model year |
From 2014 onwards |
| Drive configuration |
Front-wheel drive (FWD) |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
Where does additional wheel arch protection make sense?
These wheel arch covers are particularly useful in commercial vehicles where the cargo compartment is regularly subjected to intensive use, including:
-
Trade and construction vans carrying tools and materials
-
Courier and delivery vehicles
-
Service and installation vans
-
Fleet vehicles with frequently changing loads
-
Vans already equipped with a cargo floor or side wall lining
Especially in a partially protected cargo compartment, the two wheel arch covers can provide a useful addition by covering areas that remain exposed above the cargo floor.
Retrofit wheel arch protection to an existing Transit conversion
The ABS covers do not necessarily have to be installed as part of a completely new cargo area conversion. They can also be fitted as an addition to existing interior lining.
For example, if a cargo floor has already been installed, the projecting wheel arches may still remain exposed. This is precisely where the separate wheel arch covers provide additional protection.
For a new conversion, it can be useful to plan the cargo floor, side wall lining and wheel arch covers together so that the individual components can be coordinated during installation.
Installation by clamping, screwing or bonding
Depending on the existing installation situation, the wheel arch covers can be fitted by clamping, screwing or bonding.
The most suitable method depends on whether cargo floor panels, side wall lining or other interior equipment are already installed.
Installation note:
The required installation hardware is not included. Fixings or adhesive must be selected to suit the chosen installation method and the existing interior conversion.
Practical tip: confirm FWD before ordering
With this product, a quick technical check before ordering is particularly worthwhile. A Ford Transit from 2014 onwards is not automatically the correct vehicle version – the decisive factor is front-wheel drive (FWD).
If you are unsure which drive configuration your Transit has, check the vehicle specification before ordering. That takes considerably less time than discovering during installation that “Transit from 2014” is correct but the technical vehicle version is not.
Frequently asked questions about Ford Transit FWD wheel arch covers
Which Ford Transit are these wheel arch covers designed for?
The set is designed for the Ford Transit from 2014 onwards with front-wheel drive (FWD).
Is the drive configuration important when choosing the wheel arch covers?
Yes. This product is specifically intended for vehicles with front-wheel drive (FWD). The drive configuration should therefore be checked before ordering.
Are both wheel arch covers included?
Yes. The set includes two covers for the left and right wheel arches.
Can I retrofit the covers to a Transit that already has cargo area lining?
Yes. The wheel arch covers can be added to existing interior lining, provided that the individual installation situation allows suitable fitting.
How thick is the ABS plastic?
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
How are the wheel arch covers installed?
Depending on the installation situation, the covers can be clamped, screwed or bonded in place.
Is installation hardware included?
No. Installation hardware is not included.
Wheel arch protection specifically for the FWD Ford Transit
With this set, the two projecting wheel arches of the Ford Transit from 2014 onwards with front-wheel drive can be specifically included in the protection of the cargo compartment.
The vehicle-specific covers are made from 3 mm flexible and UV-resistant ABS plastic and can be used as part of a new cargo area conversion or added to existing interior lining.
The most important step, however, comes before installation: check FWD. Once the drive configuration has been confirmed, the most important compatibility question for this particular product has already been answered.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
