The 1.5-meter-long airline rail with a semi-circular profile is a proven solution for securely fastening loads in transporters, box trucks, trailers, and motorhomes. Thanks to the mounting holes already drilled at 10 cm intervals at the factory, the rail can be installed without any additional processing. The flat recess for M6 countersunk screws ensures a flush surface that remains durable and stable even with frequent use.
Semi-circular airline rail for load securing
The airline rail is equally suitable for horizontal and vertical installation. This means it can be installed on side walls, on the vehicle floor, on ceilings, or in rear garages. The robust aluminum ensures high stability, while the semi-circular profile guarantees excellent force distribution. Thanks to its 1.5-meter length, this version is particularly suitable for areas where longer rails cannot be installed, but where sufficient securing points are required.
The semi-circular standard rail is compatible with numerous airline fittings, locking bars, and end fittings. These include single-stud fittings, double-stud fittings, and locking bar systems for professional transport. Optional matching end caps such as 102521499 or 102071 can be used to protect the rail ends and provide a clean finish.
Technical properties
| Feature |
Value |
| Length |
1.5 meters (1,495 mm ± 3 mm) |
| Rail width |
50 mm |
| Installation height |
11.5 mm |
| Hole diameter |
20 mm |
| Hole/grid spacing |
25 mm |
| Material |
Aluminum – bare |
| Weight |
0.76 kg/m |
| Mounting hole |
S6 for M6 countersunk screw |
| Drilling distance |
100 mm |
| Made |
EU |
The technical data show the high-quality workmanship and universal compatibility of the airline rail. However, it is not only the rail itself that is decisive for later use, but also the appropriate fittings. These determine the maximum permissible force absorption at different angles and load directions. It is therefore important to select the appropriate fittings as required.
LC strength of the fittings
| Fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
As with all airline systems, the actual load capacity depends not only on the rail, but also significantly on the substrate. Load capacity, material thickness, and the type of anchoring are decisive factors. Therefore, the manufacturer's installation guidelines should always be followed and the installation should be carried out professionally. The installer is responsible for the safety values and professional installation.
FAQs about the 1.5-meter airline rail
Can the 1.5-meter rail also be installed in narrow vehicle areas?
Yes. Its compact length makes this model ideal for areas where longer rails do not fit, e.g., side walls or gaps.
Are the holes already prepared?
The airline rail is pre-drilled at the factory in a 10 cm grid and can be mounted directly with M6 countersunk screws.
Which fittings are compatible with this airline rail?
It is compatible with common airline fittings such as single-stud and double-stud fittings as well as various locking bar systems.
Is screw mounting the only option?
In addition to screw mounting, the rail can also be glued depending on the substrate. The achievable securing values then depend on the material.
Are matching end caps necessary?
End caps are optional, but they help protect the ends of the rails and provide a clean finish, especially with frequent use.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
