The 2.0-meter-long airline rail with a semi-circular profile is a versatile load securing profile for a wide variety of vehicle types. Thanks to the pre-drilled holes in a 10-cm grid, the rail can be installed immediately and enables quick, efficient retrofitting of additional lashing points.
2-meter-long semicircular airline lashing rail for top mounting
The rail can be used vertically or horizontally – ideal for vehicle side walls, floors, partition walls, shelving systems, or motorhome conversions. Its high dimensional stability also makes it suitable for smaller machines, toolboxes, suitcases, or motorcycles.
Optional matching end caps 102521499 or 102071 can be added to protect the profile ends.
Technical properties
| Property |
Value |
| Length |
2.0 meters (1995 mm ± 3 mm) |
| Rail width |
50 |
| Installation height |
11.5 mm |
| Hole diameter |
20 mm |
| Hole/grid spacing |
25 mm |
| Material |
Aluminum – bare |
| Weight |
0.76 kg/m |
| Mounting hole |
S6 for M6 countersunk screw |
| Drilling distance |
100 mm |
| Made |
EU |
The 2-meter version of the semi-circular airline rails is a balanced length – large enough for stable load distribution, but flexible enough for limited vehicle areas. The technical values clearly show that the rail itself can withstand high loads as long as the substrate is designed accordingly.
The following table lists the LC values of the compatible fittings. These values are crucial when loads need to be secured at different angles.
LC strength of the fittings
| Fitting |
Single stud (102076) |
Double stud (102036) |
| Z 90° |
500 daN |
1,000 daN |
| X-Z 45° |
500 daN |
1,000 daN |
| Y-Z 45° |
400 daN |
900 daN |
As with all airline rails, the stability of the substrate determines the final load limit. Therefore, material thickness, support structure, and screw connections are crucial for a safe result. The installer is responsible for correct fastening and subsequent load-bearing capacity.
FAQs about the 2-meter airline lashing rail for top mounting
Can the 2-meter rail be mounted directly without drilling?
Yes. The airline rail is pre-drilled every 10 cm at the factory and can be fastened immediately with M6 countersunk screws. This saves time and ensures a precise fit.
Is this version also suitable for wall mounting?
Thanks to its semicircular profile and wide contact surface, the rail can be securely mounted on walls as well as floors or ceilings.
Which fittings are compatible with this rail?
The rail is compatible with common airline fittings such as single-stud and double-stud end fittings, as well as many locking bars and special fittings.
What are the optional end caps for?
End caps protect the ends of the rails, prevent injury hazards, and provide a clean, neat finish.
What influences the actual load capacity of the rail?
The load capacity depends largely on the substructure. Material thickness, quality, and mounting points determine the safety values that can be achieved later.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
