Airline rail, flat profile, 1.5 meters
The flat airline rail with a load capacity of up to 2,000 daN can be recessed or mounted in vehicle walls and floors.
These airline rails are customer returns. The rails are slightly scratched on the edges and surface. Their function and load capacity are not impaired.Thanks to the wide flanges and the associated possibility of fastening them on the outside and inside and in the airline grid with screws or rivets, any forces that occur can be distributed evenly over a larger area.
This results in a higher possible tensile load.
The airline rail as a flat profile is not pre-drilled and can therefore be glued with Sikaflex 554, for example, on the outside and inside, or drilled at the desired points.
| Length: |
1.5 meters |
| Total width: |
65 mm |
| Total height: |
11 mm |
| Rail thickness: |
3.2 mm |
| Height from flange: |
7.8 mm |
| Hole diameter: |
20 mm |
| Hole/grid spacing: |
25 mm |
| Weight: |
1.2 kg |
| Material: |
Aluminum - bare |
| Made |
EU |
Permissible load capacities are achieved under the following conditions
An important point when installing an airline rail is the fastening to the substrate. Different
values are achieved depending on the condition, material composition, and thickness of the substrate surface.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be set at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 mm with 25.4 mm grid spacing)!
Screws with a strength of at least 10.9 must be used, with self-locking nuts and washers!
For standard Airline lashing rails, M6 screws must be used!
The Light profiles are fastened with M5 screws!
The installer of the load securing aids is responsible for the installation and the resulting possible load!
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
