When it comes to securing loads in transporters with maximum stability, high tensile forces, and a flat design, the Strong 2-meter flat profile airline rail is the professional solution. Thanks to its reinforced center floor, this profile is ideal for applications with increased load requirements in vehicle construction.
What makes the Strong 2-meter flat profile airline rail stand out?
The 2-meter-long Strong version has a reinforced center floor, 25 mm grid, 12 mm construction height, and allows up to three fastening points per crossbar. It is particularly suitable for high loads with flat installation.
Strong 2 m flat profile airline rail – reinforced professional version
The Strong flat profile airline rail has been specially developed for demanding transport solutions. The reinforced center section ensures high bending and torsional rigidity – ideal for large fastening distances or permanently high loads.
With a height of only 12 mm, the rail is ideal for flush installation under milled screen printing floors or as a wall and ceiling rail in the direction of travel.
Technical data – Strong flat profile airline rail 2 m
⚙ Technical characteristics – Strong version
| Feature |
Value |
| Length |
2.0 m (1,995 mm) |
| Total width |
65 mm |
| Groove width |
52 mm |
| Total height |
12 mm |
| Base thickness |
4.5 mm (reinforced in the center) |
| Hole diameter |
20 mm |
| Grid spacing |
25 mm |
| Weight |
approx. 1,720 g |
| Material |
Aluminum, bare |
| Origin |
Made in the EU |
Construction & special features
Compared to standard flat profiles, the Strong version offers significantly higher load-bearing capacity. The reinforced center floor distributes tensile forces evenly across the entire profile structure.
Up to three fastening points per crossbar
The rail can be fastened both to the flanges and in the center of the grid. This allows for multiple fastening points – a clear advantage when handling heavy loads.
Assembly & fastening
The airline rail is not pre-drilled and can be mounted individually. Possible fastening types:
- Screwing
- Riveting
- Bonding with suitable structural adhesives
A screw spacing of 75 mm with a 25 mm grid is recommended. Screws with a minimum strength of 10.9 should be used.
Areas of application
The Strong 2 m airline rail is ideal for:
- Vertical load securing with locking bars
- Floor mounting under screen printing plates
- Wall or ceiling mounting in vans
- Professional vehicle conversions
Comparison: Strong vs. standard flat profile
While standard flat profiles are designed for light-duty applications, the Strong version offers significantly higher stability thanks to a reinforced center floor and additional fastening options. The total height of the Strong rail is 12 mm.
Conclusion: Maximum stability with a flat design
The Strong 2-meter flat profile airline rail is the ideal solution for professional vehicle converters, craft businesses, and demanding load securing systems. High load capacity, flexible mounting, and a flat profile make it the robust premium version in the flat profile range.
Frequently asked questions about the Strong flat profile airline rail
Is the airline rail pre-drilled?
No, the rail is not pre-drilled and can be fastened individually depending on the installation situation.
Can the rail be recessed into the floor?
Yes, its low height of 12 mm makes it ideal for flush installation under milled screen printing plates.
Which screws should be used?
We recommend screws with a minimum strength of 10.9 as well as self-locking nuts and washers. Rivet nuts are
often used in vehicle construction.
What is the difference to the standard version?
The Strong version has a reinforced center base, which allows it to absorb higher forces.
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
