Large-scale vehicle conversions and long securing zones require a load securing solution that is stable and resilient throughout. The Strong flat profile airline rail, 3 meters in length, was developed specifically for such applications. Thanks to its reinforced construction, it is ideal for professional use in vans, box trucks, and commercial vehicles where high forces must be safely absorbed over long distances.
Strong flat profile airline rail – 3 meters for large-area load securing
The Strong flat profile airline rail, 3 meters in length, has a centrally reinforced base that ensures high bending and torsional rigidity. This makes the rail particularly suitable for long securing distances where standard profiles reach their load limits.
Due to its low installation height, the rail can be used both as a floor profile under milled screen printing floors up to 12 mm thick and as a ceiling rail in the direction of travel.
Technical data for the Strong 3 m flat profile airline rail
The following overview shows the key technical data for the 3-meter version and serves as a reliable basis for planning, installation, and subsequent vehicle use.
Technical properties – Strong 3 m flat profile airline rail
| Feature |
Value |
| Length |
3.0 m (2,995 mm) |
| Total width |
65 mm |
| Groove width |
52 mm |
| Total height |
12 mm |
| Base thickness |
4.5 mm (reinforced in the center) |
| Hole diameter |
20 mm |
| Grid spacing |
25 mm |
| Weight |
approx. 2,580 g |
| Material |
Aluminum, bare |
| Origin |
Made in the EU |
Design and stability features
With long airline rails, even force distribution is crucial. The Strong design ensures that any tensile and securing forces are transferred to the ground over a large area.
Reinforced center section for long spans
The reinforced center section prevents the rail from bending, even under high loads. This is particularly important for large-area load securing systems and frequent load changes.
Multi-point fastening to crossbars
Stable fastening is essential, especially when there are large distances between ceiling crossbars in transporters. The Strong flat profile can be fastened both to the flanges and in the middle profile area. This allows three fastening points per crossbar.
Installation types and fastening instructions
The actual load capacity of the airline rail depends largely on proper installation and the substrate used.
Screws, rivets, or adhesive
The airline rail is not pre-drilled and, depending on the application, can be:
- screwed
- riveted
- or glued (e.g., with suitable construction adhesives)
Installation is possible both indoors and outdoors. Drilling points can be set individually or completely replaced by gluing.
Recommended screw spacing
For secure fastening, a screw spacing of 75 mm with a metric grid of 25 mm is recommended. Only screws with a minimum strength of 10.9 should be used, each with a self-locking nut and washer.
Standard airline rails are usually mounted with M6 screws, while lighter profiles are fastened with M5 screws.
Areas of application for the Strong flat profile airline rail
The 3-meter version is particularly suitable for continuous securing systems over large areas.
Vertical and flat load securing
In combination with suitable locking bars and fittings, windows, wooden panels, machines, or large-format components can be securely fixed in place – both vertically and across long loading areas.
Suitable for various vehicle types
The Strong flat profile airline rail can be used in vans, box trucks, trailers, and flatbed trucks and is suitable for commercial as well as specialized vehicle bodies.
Standards and responsibility during installation
The installer of the load securing systems is responsible for proper installation and the resulting load capacity. Compliance with applicable standards and manufacturer specifications is expressly recommended.
Overview of relevant standards:
- ISO 29755 – Lashing points in passenger cars
- ISO 29756 – Lashing points in panel vans (transporters)
- DIN 75410-1 – Lashing points on flatbed vehicles up to 3.5 t
- EN 12640 – Lashing points on flatbed vehicles from 3.5 t
Conclusion
The Strong flat profile airline rail, 3 meters in length, is a high-performance solution for large-area and heavy-duty load securing systems. Thanks to its reinforced center floor, flexible installation, and stable multi-point fastening, it offers maximum safety and reliability for professional vehicle conversions.
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
