The 3.0-meter-long Airlineschiene Halbrundprofil Light is the right choice when a continuous, lightweight, and stable lashing rail is needed in a vehicle. It is ideal for long side walls in transporters, continuous fastening sections in motorhome rear garages, or for flexible load securing in box bodies and trailers.
Airline rail, semi-circular profile, Light – 3.0 m for maximum fastening length
Made of aluminum EN AW 6082 T6, the Light series combines low weight with high strength. With a width of only 42 mm, the 3.0 m rail fits slimly into the interior design and still offers numerous attachment points for fittings, lashing straps, and locking bars along its entire length. The semi-circular profile ensures a flat, pleasant-to-touch surface without sharp edges.
The grooves on both sides of the underside are specially designed for adhesive mounting. They absorb excess construction adhesive and support a flat, large-area connection – particularly advantageous on GRP or sandwich walls in motorhome and box body construction. As the rail is delivered undrilled, drilling patterns and screw connection points can be precisely adapted to the respective vehicle construction.
For a professional finish, we recommend the matching end cap 102521494. It covers the ends, reduces the risk of injury, and at the same time ensures a visually clean finish.
In combination with airline accessories such as single-stud or double-stud fittings, lashing straps, and locking bars, a continuous securing line is created with which tool boxes, shelving systems, camping modules, or sports equipment can be reliably secured.
Technical properties of the airline rail
| Feature |
Value |
| Length |
3.0 meters (2,997 mm) |
| Rail width |
42 mm |
| Installation height |
10 |
| Material |
Aluminum EN AW 6082 T6 |
| Grid / hole pattern |
25 mm, undrilled |
| Surface |
Bright |
| Weight |
approx. 0.53 kg/m |
| Manufacturer |
allsafe |
| Made |
Germany |
Load capacity & compatible airline fittings
The 3.0 m light rail can be combined with standard airline accessories. Typical guidelines for suitable fittings are:
Load capacity with corresponding airline fittings
| Fitting / End fitting |
Load capacity |
| Single stud fitting (102033) |
350 daN |
| Kerl 500 (102211) |
400 daN |
| Double stud fitting (102036) |
500 daN |
| Quattro stud fitting (102353) |
800 daN |
The actual permissible values always depend on the substrate, fastening distance, screw quality, and professional installation. The Light Rail is designed for use in accordance with common load securing standards (e.g., DIN 75410, ISO 27955, ISO 27956, EN 12640).
Installation recommendations for the 3.0 m Light Rail
The rail can be screwed, glued, or fastened using a combination of methods. For screw mounting, high-strength M5 countersunk screws (minimum 10.9) are recommended, which should be set in a narrow grid. For gluing, high-quality construction adhesives such as Sikaflex 554 have proven themselves – here, the grooves on the underside facilitate clean adhesive distribution.
Important: Avoid protruding screw or rivet heads so that airline fittings can run freely in the rail and do not get stuck.
Origin & quality
The Airline Rail Half Round Profile Light 3.0 m is manufactured by allsafe in Germany. Continuous quality controls, high dimensional accuracy, and a resilient aluminum alloy make it a reliable basis for professional load securing, demanding camper projects, and individual vehicle conversions – significantly higher quality than simple imported profiles without tested specifications.
FAQs about the Airline Rail Half-Round Profile Light 3.0 m
When is the 3.0 m Light rail the right choice?
Whenever a continuous fastening section is required – for example, along the side wall in a van, in the rear garage of a motorhome, or in long box bodies.
Can I just glue the rail or should I also screw it in place?
Both are possible. The grooves make gluing easier, but additional fastening with M5 countersunk screws increases the safety margin for high loads.
Is there a suitable end cap for the 3.0 m rail?
Yes, the matching end cap is recommended for a clean finish. It protects the front end and reduces the risk of injury.
Which fittings can be used with the Light rail?
The rail is compatible with standard airline fittings such as Single-Stud, Double-Stud, Kerl 500, Quattro-Stud, as well as suitable lashing straps and locking bars.
Is the 3.0 m version also suitable for camper conversions?
Yes, it is particularly popular for motorhome and van conversions, where it can be used to flexibly secure longer rows of furniture, modular boxes, or camping equipment.
allsafe GmbH & Co. KG
Gerwigstraße 31
78234 Engen
sales@allsafe-group.com
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
