Aluminum checker plate floor panel for Mercedes Sprinter - L3H2

Aluminum checker plate floor panel for Mercedes Sprinter - L3H2

SKU: 107705-MBS
Category: Mercedes Alu-Riffel-Bodenplatte

- Transporter floor for Mercedes Sprinter - L3
- Total vehicle length: 6,967 mm
- Thickness: 9 or 12 mm + 1.5/2.0 mm

Ausführung
Airlineschienen fertig montiert unter den Dachholmen
Schiebetür(en)

from

1.689,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description

Aluminum checker plate transporter floor for Mercedes Sprinter - L3

Precisely fitting CNC-milled plywood transporter floor with 1.5–2.0 mm thick aluminum checker plate for your Mercedes Sprinter type 906 from 2007 onwards and MB Sprinter type 907 from 2018 onwards with rear-wheel and all-wheel drive.

Suitable for the Mercedes Sprinter with wheelbase - L3 and high roof H2 and the following vehicle dimensions:

Designation	Wheelbase	Overall length	Cargo area length	Cargo area height	Vehicle height	Drive type
L3H2	4,325 mm	6,967 mm	4,400 mm	1,940 mm	2,616 - 2,778 mm	Rear-wheel/all-wheel drive

Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)

Versions of the base plate with aluminum checker plate

The 9 or 12 mm thick floor panel is supplied in several parts (see drawing).
The screen-printed floor is phenolic resin bonded in accordance with EN 312-2/Class 3. An aluminum checker plate floor panel with
a thickness of 1.5 - 2.0 mm is applied to the 9 or 12 mm thick screen-printed floor.
The checker plate has a quintet arrangement.

Fastening the floor panel

The floor is laid out from the front to the rear of the vehicle. The panels are connected with screws that are barely noticeable after installation and do not interfere with anything.
The lashing recesses included in the scope of delivery are positioned in the designated holes and tightened with the original lashing eyes from the vehicle. In wide vehicles, such as the Fiat Ducato or similar, a light adhesive can also be applied between the body and the floor panel in the middle to prevent vibrations.

Airline rails for the floor panel

Optionally, airline rails can be ordered under the roof crossbars (vehicle roof rails), transverse to the direction of travel, each with a length of 1.20 meters. The floor panel is milled to fit precisely and the airline rails are glued in place.
These airline rails are ideal for securing loads with locking bars.
The airline rails can only be installed in vehicle floors with a thickness of 9 mm!
Airline rails for the crossbars can also be found in our online shop.
Other lengths and positions are available on request.

Features of the
floor panels - 9 mm or 12 mm
thick birch plywood -
1.5 - 2.0 mm aluminum checker plate surface - wear-, oil-, and
water-resistant melamine coating
- lightfast (no color changes due to UV radiation) - milled to fit the respective vehicle

Note: The floor panel does not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!