Aluminum checker plate transporter floor for Opel Movano C - L4 - from 2022
Precisely fitting CNC-milled plywood transporter floor with 1.5 - 2.0 mm thick aluminum checker plate for your Opel Movano C from 2022 onwards.
For the wheelbase - L4 with the following vehicle dimensions:
| Designation |
Wheelbase |
Total length |
Cargo area length |
Cargo area height |
Vehicle height |
| L4H2 |
4,035 mm |
6,363 mm |
4,070 mm |
1,932 mm |
2,522 mm |
| L4H3 |
4,035 mm |
6,363 mm |
4,070 mm |
2,172 mm |
2,760 mm |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
Versions of the base plate with aluminum checker plate
The 9 or 12 mm thick floor panel is supplied in several parts (see drawing).
The screen-printed floor is phenolic resin bonded in accordance with EN 312-2/Class 3. An aluminum checker plate floor panel with
a thickness of 1.5 - 2.0 mm is applied to the 9 or 12 mm thick screen-printed floor.
The checker plate has a quintet arrangement.
Fastening the floor panel
The floor is laid out from the front to the rear of the vehicle. The panels are connected with screws that are barely noticeable after installation and do not interfere with anything.
The lashing recesses included in the scope of delivery are positioned in the designated holes and tightened with the original lashing eyes from the vehicle. In wide vehicles, such as the Fiat Ducato or similar, a light adhesive can also be applied between the body and the floor panel in the middle to prevent vibrations.
Airline rails for the floor panel
Optionally, airline rails can be ordered under the roof crossbars (vehicle roof rails), transverse to the direction of travel, each with a length of 1.20 meters. The floor panel is milled to fit precisely and the airline rails are glued in place.
These airline rails are ideal for securing loads with locking bars.
The airline rails can only be installed in vehicle floors with a thickness of 9 mm!
Airline rails for the crossbars can also be found in our online shop.
Other lengths and positions are available on request.
Features of the
floor panels - 9 mm or 12 mm
thick birch plywood -
1.5 - 2.0 mm aluminum checker plate surface - wear-, oil-, and
water-resistant melamine coating
- lightfast (no color changes due to UV radiation) - milled to fit the respective vehicle
Note: The floor panel does not fit in station wagons with seat rails or double cab vehicles! Only for panel vans!
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
