Welded aluminum roof rack with integrated walkway
The roof rack for Mercedes Sprinter models built from 2018 onwards (types 907 + 910) consists of welded base elements, making it particularly sturdy.
The aluminum construction makes the roof rack particularly durable and protects it against corrosion.
The centrally positioned walkway is integrated flush into the roof rack. This allows the load to be perfectly secured on both sides of the roof basket.
The scope of delivery includes the integrated walkway, front spoiler, loading roller, and mounting kit for fastening.
The roof rack with wheelbase L1, L2, L3 is supplied in two parts and the wheelbase L4 in three parts.
The height between the vehicle roof and the upper edge of the roof rack is 220 mm. An extendable ladder, a rear door ladder,
ladder clamps, and transport tubes are available as options.
For vehicles with roof heights H1 + H2 and the following vehicle sizes:
| Designation |
Drive type |
Wheelbase |
Total length |
Vehicle height |
Roof basket size |
Unladen weight |
| L1H1 |
Front-wheel drive W910 |
3,259 mm |
5,267 mm |
2,356 mm |
3,050 x 1,750 mm |
37 kg |
| L1H2
|
Front-wheel drive W910 |
3,259 mm |
5,267 mm |
2,642 mm |
2,700 x 1,550 mm |
38 kg |
| L2H1 |
Front-wheel drive W910 |
3,924 mm |
5,932 mm |
2,351 mm |
3,750 x 1,750 mm |
42 kg |
| L2H1 |
Rear-wheel drive W907 |
3,665 mm |
5,932 mm |
2,331 mm |
3,750 x 1,750 mm |
42 kg |
| L2H2 |
Front-wheel drive W910 |
3,924 mm |
5,932 mm |
2,638 mm |
3,400 x 1,550 mm |
40 kg |
| L2H2 |
Rear-wheel drive W907/910 |
3,665 mm |
5,932 mm |
2,620 mm |
3,400 x 1,550 mm |
40 kg |
| L3H2 |
Rear-wheel drive W907/910 |
4,035 mm |
6,967 mm |
2,616 mm |
4,300 x 1,550 mm |
44 kg |
| L4H2 |
Rear-wheel drive W907/910 |
4,035 mm |
7,367 mm |
2,613 mm |
4,820 x 1,550 mm |
47 kg |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
Note 2: Front-wheel drive = FWD/rear-wheel drive = RWD
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
The extendable ladder is attached directly under the existing walkway. It does not put any strain on the tailgate and is also suitable for loads of up to 150 kg. Depending on the
type, it weighs between 20 and 24 kg and has a step width of 466 mm.
For taller transporters, such as four-wheel drive vehicles or double-axle panel vans, you will need the RESP4500 extension.
The aluminum tailgate ladder is clamped onto the vehicle door. Permanent mounting with screws is not necessary. This is particularly interesting for leased vehicles. The steps are non-slip and therefore safe even in bad weather.
Note: Rear door ladders are only suitable for vehicles with rear doors (hinged doors).
| Width: |
255 mm |
| Length - roof height H1 (FWD/RWD): |
1,565/1,645 mm |
| Length - roof height H3 (FWD/RWD): |
1,870/1,950 mm |
| Load capacity: |
100 kg |
| Weight depending on model: |
approx. 7 - 8 kg |
The lockable
transport tube is an aerodynamic loading tube for transporting long goods on the roof rack.
These are one-piece and available in lengths of 2, 3, 4, 5, and 6 meters.
The plastic end caps with profile ensure minimal air resistance and a modern appearance.
The aluminum construction offers high stability with low weight.
The transport tube has an extension system that allows shorter parts to be loaded.
| Inner width: |
210 mm |
| Inner height: |
142 mm |
| Weight at 2 meters length: |
23.0 kg |
| Weight at 3 meters length: |
29.5 kg |
| Weight at 4 meters length: |
36.0 kg |
| Weight at 5 meters length: |
42.5 kg |
| Weight at 6 meters length: |
49.0 kg |
| Material: |
Anodized aluminum |
MTS - Z.I. Saint-Arnoult
28170 Châteauneuf-en-Thymerais
contact@mts-galeries.fr
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
