Welded aluminum roof rack with integrated walkway
The roof rack for the Nissan Interstar from model year 2024 onwards consists of welded base elements and is therefore particularly stable.
The aluminum makes the roof rack particularly durable and protects it against corrosion.
The centrally positioned walkway is flush-mounted in the roof rack. This allows the load to be perfectly secured on both sides of the roof basket.
The scope of delivery includes the integrated walkway, front spoiler, loading roller, and mounting kit for attachment.
The roof rack with wheelbase L2 and L3 is supplied in two parts.
The height between the vehicle roof and the upper edge of the roof rack is 245 mm. An extendable ladder, a rear door ladder,
ladder clamps, and transport tubes are available as options.
For vehicles with roof height H2 with the following vehicle sizes:
| Designation |
Wheelbase |
Total length |
Vehicle height |
Roof basket size |
| L2H2 |
3,583 mm |
5,685 mm |
2,498 mm |
3,155 x 1,550 mm |
| L3H2 |
4,213 mm |
6,315 mm |
2,498 mm |
3,755 x 1,550 mm |
Note: You will find the vehicle length in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
The extendable ladder is attached directly under the existing walkway. It does not put any strain on the tailgate and is also suitable for loads of up to 150 kg. Depending on the
type, it weighs between 20 and 24 kg and has a step width of 466 mm.
For taller transporters, such as four-wheel drive vehicles or double-axle panel vans, you will need the RESP4500 extension.
The aluminum tailgate ladder is clamped onto the vehicle door. Permanent mounting with screws is not necessary. This is particularly interesting for leased vehicles.
The steps are non-slip and therefore safe even in bad weather.
Note: Rear door ladders are only suitable for vehicles with rear doors (hinged doors).
| Width: |
255 mm |
| Length: |
1,825 mm |
| Load capacity: |
100 kg |
| Weight depending on model: |
approx. 7–8 kg |
The lockable
transport tube is an aerodynamic loading tube for transporting long goods on the roof rack.
These are one-piece and available in lengths of 2, 3, 4, 5, and 6 meters.
The plastic end caps with profile enable minimal air resistance and a modern appearance.
The aluminum construction offers high stability with low weight.
The transport tube has an extension system that allows shorter parts to be loaded.
| Inner width: |
210 mm |
| Inner height: |
142 mm |
| Weight at 2 meters length: |
23.0 kg |
| Weight at 3 meters length: |
29.5 kg |
| Weight at 4 meters length: |
36.0 kg |
| Weight at 5 meters length: |
42.5 kg |
| Weight at 6 meters length: |
49.0 kg |
| Material: |
Anodized aluminum |
MTS - Z.I. Saint-Arnoult
28170 Châteauneuf-en-Thymerais
contact@mts-galeries.fr
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
