Rubber mat for Peugeot Boxer double cab cargo area
Our anti-slip rubber mat for the Peugeot Boxer Multicap with double cab, built in 2006 or later, is 3 mm thick, easy to install, and fits securely in the vehicle thanks to its customized shape.
Its anti-slip properties reduce the amount of force required to secure the load.
It can be easily rolled out and rolled up again and is not prone to breakage thanks to its material properties.
The rubber mat is only suitable for Snoek double cab vehicles with a partition wall at the C-pillar and does not fit in a vehicle with a DURISOTTI double cab partition wall!
The anti-slip mat is cut to fit the following vehicle sizes:
| Designation |
Wheelbase |
Overall length |
Cargo area length |
Cargo area height |
Vehicle height |
| L2H1 |
3,450 mm |
5,413 mm |
2,490 mm |
1,662 mm |
2,254 mm |
| L2H2 |
3,450 mm |
5,413 mm |
2,490 mm |
1,932 mm |
2,522 mm |
| L3H2 |
4,035 mm |
5,998 mm |
3,075 mm |
1,932 mm |
2,522 mm |
| L4H2 |
4,035 mm |
6,363 mm |
3,440 mm |
1,932 mm |
2,522 mm |
Note: You will find the vehicle length in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Features of the anti-slip rubber mat
The anthracite-colored mat is not a replacement for the floor panel. It should be viewed as an additional anti-slip component.
It can be laid on top of our multiplex or plastic floor panels.
The rubber floor consists of a 3 mm thick styrene-butadiene rubber mat.
The material is REACH-compliant.
The surface of the rubber mat is additionally perforated to make it slip-resistant.
However, it is not certified as an anti-slip mat for securing loads! A sliding friction coefficient has not been determined.
The rubber mats are suitable for the following areas of application: water, air, dry and wet chemicals, organic acids, alcohol, ketones, and aldehydes.
The rubber mats are not suitable for acids, ozone, fats, oil, lubricants, or almost all fuels.
Note: Due to the possible odor formation from the rubber, the mat is not suitable for motorhomes, transporters without a partition wall, or vehicles used to transport food.
Technical data SBR rubber
Cobra SBR rubber mats are shock-absorbing, sound-absorbing, non-slip, and provide excellent insulation.
Hardness 75° Shore +/- 5 according to
DIN53505- Elongation at break 200% according to
DIN53504- Tensile strength 3 Mpa according to
DIN53504- Temperature resistance -20C to
+70C- Density grs/cm³ 1.5 according to DIN53508
- Compression at 70 °C for 22 hours 20% according to DIN53517
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
