Cargo area paneling for Ford Custom with long wheelbase
CNC-milled side panel lining made of 4 mm thick gray plastic honeycomb panel or 4 mm birch plywood, for the Ford Custom
built between
2013 and 2023.
Suitable for wheelbase L2 and high roof H2 with the following vehicle dimensions:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Interior height |
Cargo area length |
| L2H2 |
Wing doors |
3,300 mm |
5,339 mm |
2,338 mm |
1,778 mm |
2,922 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20, and the year of manufacture under item: 6. (Applies to German vehicle registration certificates)
Design and scope of delivery of the cargo area trim The
interior trim is delivered to the areas specified by the vehicle manufacturer, including all wall trim, side door trim, side door window cutouts, and lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray moisture-resistant coated plywood is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original mounting points are not used during installation.
Features of the side wallpaneling - CNC-milled to
fit your vehicle perfectly - Mounting hardware included in
delivery - 4 mm plastic
honeycomb profile - 4 mm multiplex plywood
Shipping is carried out by a freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
