Large rear step for Mercedes Sprinter - RWD - 1800 without trailer coupling

Large rear step for Mercedes Sprinter - RWD - 1800 without trailer coupling

SKU: 100102532
Category: Rigid rear steps

- Rear step for MB Sprinter
- with a tread area of 1,800 x 250 mm
- for vehicles without a trailer hitch

PDC Adapter Retrofit / Extension Kit

from

739,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 0 Workdays (DE - int. shipments may differ)

Description

Large rear step for Mercedes Sprinter 906 and 907

Step with a tread area of 1,800 x 250 mm, for the Mercedes Sprinter (906) from 2006 onwards and Sprinter (907) from 2018 onwards with rear-wheel drive, as well as VW Crafter from 2006 to 02/2017.

Only for vehicles without a trailer coupling!

The step has a non-slip surface in accordance with UVV specifications and is made of hot-dip galvanized steel.
There are four holes for the factory-fitted parking sensors. If these are not used, four cover caps are included in the scope of delivery.

Suitable for vehicles with the following dimensions:

Designation	Drive type	Wheelbase	Vehicle length	Vehicle height
L2H2	Rear-wheel drive W906/907	3,665 mm	5,932 mm	2,620 mm
L3H2	Rear-wheel drive W906/907	4,325 mm	6,967 mm	2,616 mm
L4H2	Rear-wheel drive W906/907	4,325 mm	7,367 mm	2,613 mm

Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)

Further note: For vehicles with the wheelbase - L4, the approach angle is reduced!

Features of the sturdy rear step

Step size: 1,800 x 250 mm
Load capacity: 150 kg
Installation time: 1.5 hours

The HTF rear step is an excellent entry solution for tradespeople and delivery vehicles. The HTF step series is available in three widths. It can be quickly attached under the rear bumper using vehicle-specific brackets. These brackets are mounted at the mounting points
on the chassis. The HTF step series is made entirely of hot-dip galvanized steel, making it very robust and durable. There are also versions that can be combined with trailer hitches.

PLUS points of the rigid rear step

- Ergonomic loading and unloading
- Wide tread for maximum entry
comfort - Also available
for vehicles with tow bars -
Heavy-duty - Non-slip surface in accordance with UVV
regulations - Easy
installation
without special tools - Corrosion protection: hot-dip galvanized - Step depth: 220 mm