A Peugeot Partner or Citroën Berlingo II from 2008 to 2018 can still be working hard many years after it first entered service. On a regularly used commercial vehicle, however, those years may be clearly visible around the rear bumper: toolboxes, materials, parcels and other cargo can leave scratches and signs of use during everyday loading and unloading.
The vehicle-specific aluminium rear bumper protector for the Peugeot Partner and Citroën Berlingo II therefore serves two purposes. It can protect a bumper that is still in good condition during continued use or conceal existing scratches and damage within the area covered by the protector.
All six available versions are made from 1.5 mm aluminium and feature a folded edge. A range of surface finishes is available – from classic aluminium chequer plate and anodised versions to a brushed stainless-steel look and aluminium with machined grooves.
Which bumper protector fits the Peugeot Partner and Citroën Berlingo II?
In short: This aluminium rear bumper protector is designed for the Peugeot Partner and Citroën Berlingo II from 2008 to 2018. All six versions are made from 1.5 mm aluminium, feature a folded edge and are attached using special adhesive tape applied to the rear. No drilling or screws are required.
When years of everyday work become visible
With an older commercial vehicle, protecting the very first scratch is not always the main concern. A Partner or Berlingo II of this generation may already have spent many years working in trades, service, delivery or other transport applications.
The rear bumper can show that history particularly clearly. When tools, boxes or materials are removed from the cargo area, even brief contact can leave another mark. Over the years, many small scratches can develop into clearly visible signs of use.
The aluminium bumper protector covers this exposed section of the rear bumper. Existing scratches or damage located within the covered area can be concealed underneath the new aluminium surface, while the covered bumper area also receives additional protection during future loading and unloading.
A practical upgrade for an older working van
A bumper protector can still be a useful addition even when a vehicle has already spent several years on the road. If your Peugeot Partner or Citroën Berlingo II is still doing its job every day, the rear bumper does not necessarily have to display every loading job from the past.
When a bumper protector can be useful on the Partner or Berlingo II
| Current condition |
Benefit of the bumper protector |
| Bumper still in good condition |
The exposed area receives additional coverage during continued loading and unloading. |
| Light signs of use |
Scratches within the covered area can be concealed underneath the aluminium protector. |
| Heavily used loading edge |
Existing damage within the covered area can be concealed while the bumper receives additional coverage for future use. |
Six aluminium surface finishes to choose from
The bumper protector for the Peugeot Partner and Citroën Berlingo II is available in six different surface finishes. Regardless of the appearance you choose, one specification remains the same: all versions are made from 1.5 mm aluminium.
Available versions of the Partner and Berlingo II bumper protector
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Chequer plate, stainless-steel look or machined grooves?
As all six versions are made from 1.5 mm aluminium, the choice can primarily be based on the appearance you prefer.
Classic aluminium chequer plate provides a distinctive, functional commercial-vehicle appearance. Silver anodised and black anodised chequer plate versions are also available if you prefer the same characteristic pattern with a different finish.
For a more understated appearance, you can choose brushed aluminium with a stainless-steel look. This version is not made from stainless steel: it is also aluminium. The term “stainless-steel look” refers only to the appearance of the brushed surface.
Matt silver anodised and black anodised aluminium versions with machined grooves complete the range.
The folded edge extends the covered area
During loading and unloading, cargo may come into contact not only with the upper surface of the rear bumper. The adjoining section of the loading edge can also be touched when items are lifted, lowered or pulled out of the cargo area.
For this reason, the bumper protector features a folded edge. The aluminium cover extends beyond the upper surface and also covers the adjoining section of the loading edge.
Self-adhesive installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – Peugeot Partner & Citroën Berlingo II bumper protector
Aluminium bumper protector for Peugeot Partner and Citroën Berlingo II
| Feature |
Specification |
| Vehicles |
Peugeot Partner & Citroën Berlingo II |
| Model years |
2008–2018 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: An older van can still look tidy at the rear
A Partner or Berlingo II does not have to be new for a bumper protector to make sense. On a vehicle that is still reliably earning its keep, fitting one can combine two useful functions: concealing existing signs of use within the covered area and providing additional protection during future loading operations.
After all, the rear bumper does not need to keep a visible record of every toolbox, parcel and piece of material that has passed through the van over the years. 😄
Frequently asked questions about the Partner & Berlingo II bumper protector
Which vehicles does the bumper protector fit?
The bumper protector is designed for the Peugeot Partner and Citroën Berlingo II from 2008 to 2018.
How thick is the aluminium bumper protector?
All six available versions are made from 1.5 mm aluminium.
Is the stainless-steel-look version made from stainless steel?
No. The brushed stainless-steel-look version is also made from aluminium. “Stainless-steel look” refers only to the appearance of the surface.
Can the bumper protector cover existing scratches?
Yes. Scratches or damage located within the area covered by the bumper protector can be concealed underneath the aluminium cover.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
Do I need to drill or use screws for installation?
No. The bumper protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Why does the bumper protector have a folded edge?
The folded edge extends the coverage from the upper surface to the adjoining section of the loading edge.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Protect your Partner or Berlingo II for the jobs still ahead
A Peugeot Partner or Citroën Berlingo II from 2008 to 2018 can remain a useful working vehicle long after its first years on the road. In that situation, a rear bumper protector provides a practical way to upgrade one of the most frequently used areas at the back of the van.
The vehicle-specific 1.5 mm aluminium rear bumper protector can conceal existing signs of use within the covered area while providing additional protection for the bumper during continued loading and unloading. The special adhesive tape on the rear allows installation without drilling or screws.
Six different aluminium finishes also allow you to choose the appearance that suits your vehicle – from classic chequer plate and a brushed stainless-steel look to silver or black anodised versions.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers