Peugeot Bipper, Fiat Fiorino and Citroën Nemo models from 2008 to 2015 are compact commercial vehicles where the available cargo space can see intensive everyday use. Tool cases, parcels, material boxes and other items may be loaded and unloaded repeatedly through the same rear opening – passing the rear loading edge every time.
The vehicle-specific aluminium rear bumper protector for Peugeot Bipper, Fiat Fiorino and Citroën Nemo covers this frequently used section of the rear bumper. On a bumper that is still in good condition, it provides an additional protective surface. If scratches or damage are already present, they can be concealed underneath the protector within the area it covers.
All six available versions are made from 1.5 mm aluminium and feature a folded edge. Different surface finishes allow you to choose between classic chequer plate, anodised versions, a brushed stainless-steel look and aluminium with machined grooves.
Which bumper protector fits the Bipper, Fiorino and Nemo?
In short: This aluminium rear bumper protector is designed for the Peugeot Bipper, Fiat Fiorino and Citroën Nemo from 2008 to 2015. All six versions are made from 1.5 mm aluminium, feature a folded edge and are attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Compact van – frequently used loading edge
A compact vehicle does not necessarily mean light use. Bipper, Fiorino and Nemo models used for service work, trades or deliveries may handle numerous short transport jobs throughout the working day. This can mean opening, loading and unloading the cargo area again and again.
The size of an individual item is therefore not always the main factor. Many small loading operations can also leave their mark: a tool case is lifted out, a material box goes back in, a parcel is unloaded and another container is pushed into position – all across the same rear section of the vehicle.
The aluminium rear bumper protector covers this frequently used area and provides an additional protective surface between the bumper and everyday cargo.
When many small contacts add up over time
With a compact delivery or service van, visible signs of use are not necessarily caused by one major loading incident. Repeated minor contact during everyday work can be much more typical.
Typical situations around the loading edge of the Bipper, Fiorino and Nemo
| Loading situation |
Possible contact with the loading edge |
| Removing a tool case |
The case may touch the rear loading edge while being lifted or pulled out. |
| Parcels & material boxes |
Items may briefly rest on the bumper area during frequent loading and unloading. |
| Crates & containers |
The underside of a container may pass across the rear area when it is moved out of the cargo space. |
| Frequent short stops |
Numerous individual loading operations can gradually result in visible signs of use. |
A practical upgrade for an older commercial vehicle
On vehicles built between 2008 and 2015, the rear bumper may already have experienced many years of working use. A bumper protector therefore does not have to be fitted only as a preventive measure.
If existing scratches or damage are located within the area covered by the protector, they can be concealed underneath the aluminium surface. At the same time, the covered bumper area receives additional protection during continued use.
This makes the rear bumper protector suitable both for a well-kept Bipper, Fiorino or Nemo and for a working vehicle that already shows some evidence of its previous transport duties.
Six finishes – always 1.5 mm aluminium
Six different versions are available. One technical detail is the same across the entire range: all versions are made from aluminium and have a material thickness of 1.5 mm. The differences are in the appearance and design of the visible surface.
Available aluminium surface finishes
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Which finish suits your Bipper, Fiorino or Nemo?
As the material and thickness are the same across all six versions, the choice can primarily be based on the appearance you prefer.
Aluminium chequer plate provides the classic technical look associated with commercial vehicles and is also available with silver or black anodised finishes.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. This version is also made entirely from aluminium – “stainless-steel look” describes only the appearance of the surface.
Matt silver anodised and black anodised aluminium versions with machined grooves provide two further alternatives.
Folded edge for additional coverage
The rear bumper protector is manufactured with a folded edge, extending the cover beyond the upper surface to include the adjoining section of the loading edge.
This area can also come into contact with tool cases, boxes and other cargo when items are lifted, lowered or pulled out of the vehicle.
Self-adhesive installation without drilling
A high-quality self-adhesive special tape is applied to the rear of the aluminium bumper protector. This is used to attach the protector to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – bumper protector for Bipper, Fiorino & Nemo
Aluminium rear bumper protector – product specifications
| Feature |
Specification |
| Vehicles |
Peugeot Bipper, Fiat Fiorino & Citroën Nemo |
| Model years |
2008–2015 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: Frequency matters more than size
A small tool case may not look like much of a challenge for a rear bumper. But if it is lifted in and out several times every working day, the situation can look very different after years of use. The same applies to parcels, material boxes and other regularly transported items.
With the Bipper, Fiorino and Nemo, it is therefore worth considering how often the cargo area is used, rather than looking only at the size or weight of the load. Lots of small contacts can eventually tell quite a story – one scratch at a time. 😄
Frequently asked questions about the Bipper, Fiorino & Nemo bumper protector
Which vehicles does the bumper protector fit?
The bumper protector is designed for the Peugeot Bipper, Fiat Fiorino and Citroën Nemo from 2008 to 2015.
What material is the bumper protector made from?
All six available versions are made from 1.5 mm aluminium. This also applies to the stainless-steel-look version, which is aluminium rather than stainless steel.
Can the bumper protector conceal existing scratches?
Yes. Scratches or damage located within the area covered by the bumper protector can be concealed underneath the aluminium cover.
Is drilling required for installation?
No. The bumper protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Protect the compact loading edge for the jobs still ahead
Peugeot Bipper, Fiat Fiorino and Citroën Nemo models from 2008 to 2015 show that a compact commercial vehicle can still handle plenty of work. Frequent short journeys and repeated loading and unloading can bring cargo into contact with the rear bumper area again and again.
The vehicle-specific 1.5 mm aluminium rear bumper protector covers this area and can also conceal existing signs of use within the surface it covers. The special adhesive tape on the rear allows installation without drilling or screws.
With six different aluminium finishes available, you can also choose the appearance that best suits your Bipper, Fiorino or Nemo and the way the vehicle continues to be used.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers