The Fiat Scudo III from 2022 is designed for everyday commercial use, where the rear cargo entrance can quickly become one of the busiest areas of the vehicle. Toolboxes, machinery, materials, transport containers and longer items are regularly loaded, unloaded and moved across the rear loading edge.
The vehicle-specific aluminium rear bumper protector for the Fiat Scudo III covers this exposed section of the rear bumper. It can be used to protect a bumper that is still in good condition or to conceal existing scratches and damage within the area covered by the protector.
All available versions are made from 1.5 mm aluminium and feature a folded edge. Six different surface finishes are available – from classic aluminium chequer plate and silver or black anodised versions to a brushed stainless-steel look and aluminium with machined grooves.
Which bumper protector fits the Fiat Scudo III?
In short: This aluminium rear bumper protector is designed for the Fiat Scudo III from 2022. All six versions are made from 1.5 mm aluminium, feature a folded edge and are attached using special adhesive tape applied to the rear. No drilling or screws are required.
When cargo is moved across the rear loading edge
Not every item can simply be lifted straight into or out of a van. Toolboxes, machinery, longer materials and larger transport containers often need to be lifted, tilted or pulled out of the cargo area.
During these movements, the rear bumper sits directly below the path of the cargo. Even brief contact when lifting, lowering or pulling an item out of the vehicle can leave marks. When this happens regularly during everyday work, the loading edge can quickly become one of the most visibly used areas at the rear of the van.
The aluminium bumper protector covers this exposed section and provides an additional protective surface over the bumper underneath.
For materials, tools and bulkier cargo
The Fiat Scudo III is used for a wide range of jobs in trades, service, installation and transport. A bumper protector is particularly useful when the rear cargo area is accessed frequently and tools, equipment or other cargo are regularly moved across the loading edge.
Typical loading situations with the Fiat Scudo III
| Cargo / application |
Typical situation at the loading edge |
| Toolboxes & machinery |
Heavy or awkward items can come into contact with the bumper area during loading and unloading. |
| Longer materials |
Long items are often guided across the rear cargo entrance when being removed from the vehicle. |
| Transport containers |
Boxes and containers may be lifted, lowered or pulled out of the cargo area on a regular basis. |
| Frequent loading & unloading |
Repeated loading operations can gradually leave visible signs of use on the rear bumper. |
Protect the bumper or cover existing signs of use
A rear bumper protector does not only become useful once the bumper is already heavily scratched. On a new or well-maintained Fiat Scudo, the exposed area can be covered early to help protect it during regular loading and unloading.
If the vehicle has already seen plenty of everyday work, the aluminium cover can serve a second purpose: scratches or damage located within the area covered by the protector can be concealed underneath it.
Two ways to use the Scudo III bumper protector
| Situation |
Benefit |
| Bumper still in good condition |
The exposed area receives additional coverage during regular loading and unloading. |
| Signs of use already present |
Scratches or damage within the covered area can be concealed underneath the aluminium bumper protector. |
Six aluminium finishes for the Fiat Scudo III
The bumper protector is available in six different surface finishes. The material specification remains the same for every version: all six variants are made from 1.5 mm aluminium.
This means the choice can primarily be based on the appearance you prefer – from the characteristic chequer plate pattern to more understated brushed or anodised finishes.
Available versions of the Fiat Scudo III bumper protector
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised aluminium chequer plate |
Chequer plate with silver anodised finish |
1.5 mm |
| Black anodised aluminium chequer plate |
Chequer plate with black anodised finish |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised aluminium |
Matt silver anodised surface with machined grooves |
1.5 mm |
| Black anodised aluminium |
Black anodised surface with machined grooves |
1.5 mm |
Which surface finish suits your Fiat Scudo?
As all six versions are made from 1.5 mm aluminium, the choice can primarily be based on the surface appearance you prefer.
Classic aluminium chequer plate gives the rear of the vehicle a distinctive, functional appearance. If you prefer the same characteristic pattern with a different finish, silver anodised and black anodised chequer plate versions are also available.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. This version is still made from aluminium – the term “stainless-steel look” refers only to the appearance of the brushed surface.
Matt silver anodised and black anodised aluminium versions with machined grooves complete the range.
Why the folded edge matters during loading and unloading
When larger or awkward items are moved in and out of the cargo area, contact does not necessarily occur only on the upper surface of the bumper. The adjoining section of the loading edge can also be touched when cargo is lifted, lowered or pulled out of the vehicle.
For this reason, the bumper protector features a folded edge. The aluminium cover extends beyond the upper surface and also covers the adjoining section of the loading edge.
Self-adhesive installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements during installation.
Technical specifications – Fiat Scudo III bumper protector
Fiat Scudo III aluminium bumper protector – product specifications
| Feature |
Specification |
| Vehicle |
Fiat Scudo III |
| Model year |
From 2022 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: Think beyond scratches caused by small boxes
When thinking about loading-edge damage, toolboxes and transport boxes are usually the first things that come to mind. With the Scudo, however, longer or more awkward items are just as relevant. When an item is pulled out of the cargo area or tilted while being removed, the rear bumper sits directly underneath its path.
This makes a bumper protector particularly useful when the Scudo regularly carries materials, machinery or cargo of different sizes. And if a previous loading job has already left its mark, scratches within the covered area can be concealed underneath the aluminium protector.
Frequently asked questions about the Fiat Scudo III bumper protector
Which Fiat Scudo does the bumper protector fit?
The bumper protector is designed for the Fiat Scudo III from 2022.
How thick is the aluminium bumper protector?
All six available versions are made from 1.5 mm aluminium.
Is the stainless-steel-look version made from stainless steel?
No. This version is also made from aluminium. “Stainless-steel look” refers only to the appearance of the brushed aluminium surface.
Which surface finishes are available?
The available versions are aluminium chequer plate, silver anodised aluminium chequer plate, black anodised aluminium chequer plate, brushed aluminium with a stainless-steel look, matt silver anodised aluminium with machined grooves and black anodised aluminium with machined grooves.
Do I need to drill or use screws for installation?
No. The bumper protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
Can the bumper protector conceal existing scratches?
Yes. Scratches or damage located within the area covered by the bumper protector can be concealed underneath the aluminium cover.
Why does the bumper protector have a folded edge?
The folded edge extends the coverage from the upper surface to the adjoining section of the loading edge.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Prepare the Fiat Scudo for regular loading and unloading
On the Fiat Scudo III from 2022, the rear cargo entrance can quickly become an essential part of the working day. When machinery, tools, materials or bulkier items are regularly moved in and out of the van, the rear bumper sits directly within the working area.
The vehicle-specific 1.5 mm aluminium rear bumper protector covers this exposed section, features a folded edge and is attached using the special adhesive tape on the rear – without drilling or screws.
Six different aluminium finishes also allow you to choose the appearance that suits your Scudo, ranging from classic chequer plate and a brushed stainless-steel look to silver or black anodised versions.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
