On the Peugeot Expert from 2016, the rear of the vehicle often serves as more than just access to the cargo area. Tool cases are taken out, material boxes are prepared, parcels are sorted and items may briefly be set down while changing grip. As a result, the rear bumper can repeatedly come into contact with cargo during everyday work.
The vehicle-specific aluminium rear bumper protector for the Peugeot Expert covers this frequently used area of the bumper. It can provide additional protection for a surface that is still in good condition or offer a practical way to conceal existing scratches and damage within the area covered by the protector.
Six different surface finishes are available. All versions are made from 1.5 mm aluminium, feature a folded edge and are attached using the special adhesive tape applied to the rear.
Which bumper protector fits the Peugeot Expert?
In short: This aluminium rear bumper protector is designed for the Peugeot Expert from 2016. All six versions are made from 1.5 mm aluminium and feature a folded edge. Installation is carried out using special adhesive tape on the rear of the protector, so no drilling or screws are required.
When the loading edge becomes part of the workspace
With a commercial vehicle, the job does not end when the rear doors are opened. Quite often, that is where the sorting begins: Which tool case is needed first? Which material box needs to go to the job site? Which parcel has to be unloaded?
This can quickly turn the rear of the vehicle into a small handover area between the cargo space and the workplace. A box may be briefly set down while changing grip, a tool case pulled towards the rear or materials positioned ready for the next stage of the job.
Each of these actions may last only a few seconds. But when they are repeated regularly, visible signs of use can develop on the rear bumper. The aluminium bumper protector covers exactly this frequently used area.
Typical situations at the rear of the Expert
How the loading edge can be used during everyday work
| Working situation |
Possible contact |
| Preparing tools |
Cases or equipment may briefly come into contact with the bumper area when being removed. |
| Sorting materials |
Boxes and containers may be moved towards the rear or briefly set down while being sorted. |
| Handling parcels |
When lifting or changing grip, the cargo passes directly above the rear bumper. |
| Reloading the vehicle |
The same area is passed again when tools and materials are returned to the cargo space. |
Protect the bumper or cover existing marks
A bumper protector is not only useful on a new or nearly unmarked bumper. Depending on how the vehicle has been used, a Peugeot Expert may already show scratches or other visible signs of use around the rear bumper.
If these marks are located within the area covered by the protector, they can be concealed underneath the aluminium surface. At the same time, the covered section gains an additional protective surface for future loading and unloading.
This makes the bumper protector suitable both as a preventive upgrade and for an Expert that has already spent plenty of time in commercial use.
Six finishes in 1.5 mm aluminium
Six different versions are available for the Peugeot Expert. They all share one important specification: every version is made from aluminium and is 1.5 mm thick. The choice therefore mainly depends on the surface appearance you prefer.
Available aluminium surface finishes
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised chequer plate |
Silver anodised aluminium chequer plate |
1.5 mm |
| Black anodised chequer plate |
Black anodised aluminium chequer plate |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised |
Aluminium with machined grooves |
1.5 mm |
| Black anodised |
Aluminium with machined grooves |
1.5 mm |
Which finish suits the Expert?
For a classic commercial-vehicle appearance, you can choose aluminium chequer plate or one of the silver or black anodised chequer plate versions.
For a more understated appearance, there is brushed aluminium with a stainless-steel look. This version is not made from stainless steel: it is also 1.5 mm aluminium. “Stainless-steel look” refers only to the appearance of the visible surface.
The range is completed by matt silver anodised and black anodised aluminium versions with machined grooves.
Folded edge for additional protection
The Peugeot Expert bumper protector is supplied with a folded edge, providing additional protection around the loading edge.
This area is particularly relevant during regular loading and unloading, as boxes, tools and other cargo may pass close to it when being lifted or set down.
Installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the bumper protector. This is used to attach the aluminium cover to the intended area of the rear bumper.
No drilling or screws are required for installation.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Technical specifications
Aluminium rear bumper protector for Peugeot Expert
| Feature |
Specification |
| Vehicle |
Peugeot Expert |
| Model year |
From 2016 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: The loading edge is not a workbench
It happens easily during a busy working day: pull out the tool case, set it down for a moment, change grip and carry it to the job. Small routines like these can mean that the rear bumper comes into contact with tools and materials more often than you might initially expect.
Careful handling still matters – the bumper protector does not magically turn the bumper into a workbench. 😄 What it does provide is an additional aluminium cover for an area that can see frequent use during everyday work with the Peugeot Expert.
Frequently asked questions
Which Peugeot Expert does the bumper protector fit?
The bumper protector is designed for the Peugeot Expert from 2016.
What material is the bumper protector made from?
All six available versions are made from 1.5 mm aluminium.
Is the stainless-steel-look version made from stainless steel?
No. The brushed stainless-steel-look version is also made from aluminium. The description refers only to the appearance of the surface.
Can it cover existing scratches?
Yes. If scratches or damage are located within the area covered by the bumper protector, they can be concealed underneath the aluminium surface.
Is drilling required for installation?
No. The protector is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
A practical addition to the rear workspace
The rear of the Peugeot Expert from 2016 connects the cargo area with the workplace outside the vehicle. This is where tools, materials, parcels and containers are regularly moved, sorted and handed over.
The 1.5 mm aluminium rear bumper protector covers this frequently used bumper area and can also conceal existing signs of use within the surface it covers. Six different finishes allow you to select the appearance that best suits your vehicle.
The special adhesive tape on the rear allows installation without drilling or screws.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers