Rear step for Mercedes Sprinter - FWD - 1400 mm without trailer hitch

SKU: 100101387
Category: Starre Hecktrittstufen

- Rear step for MB Sprinter
- with a tread area of 1,400 x 250 mm
- for vehicles without a trailer
hitch - for MB Sprinter with front-wheel drive

615,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description

Rigid rear step, hot-dip galvanized steel, for Mercedes Sprinter - FWD

Step with a tread area of 1,400 x 250 mm, for the Mercedes Sprinter (W910) from 2018 onwards with front-wheel drive.
Only for vehicles without a trailer coupling.

The step has a non-slip surface in accordance with UVV specifications and is made of hot-dip galvanized steel.
There are four holes for the factory-fitted parking sensors. If these are not used, four cover caps are included in the scope of delivery.

Suitable for vehicles with the following dimensions:

Designation	Drive type	Wheelbase	Vehicle length	Vehicle height
L1H1	Front-wheel drive W910	3,259 mm	5,267 mm	2,356 mm
L1H2	Front-wheel drive W910	3,259 mm	5,267 mm	2,638 mm
L2H1	Front-wheel drive W910	3,924 mm	5,932 mm	2,351 mm
L2H2	Front-wheel drive W910	3,924 mm	5,932 mm	2,638 mm

Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)

Features of the sturdy rear step

The step has a non-slip surface in accordance with UVV specifications and is made of hot-dip galvanized steel.
There are four holes for the factory-fitted parking sensors. If these are not used, four cover caps are included in the scope of delivery.

Tread surface: 1,400 x 250 mm
Load capacity: 150 kg
Installation time: approx. 1.5 hours
Weight: 18.5 kg

The HTF rear step series is an excellent entry-level solution for tradespeople and delivery vehicles. The HTF step series is available in three widths. It can be quickly attached under the rear bumper using vehicle-specific brackets. These brackets are mounted at the mounting points
on the chassis. The HTF step is made entirely of hot-dip galvanized steel, making it very robust and durable. There are also versions that can be combined with trailer hitches.

PLUS points of the rear step

- Ergonomic loading and unloading
- Wide tread for maximum entry
comfort - Also available
for vehicles with trailer hitches -
Heavy-duty - Non-slip surface in accordance with UVV
regulations - Easy
installation without special tools - Corrosion protection: hot-dip
galvanized - Step depth: 220 mm