Rigid rear step, hot-dip galvanized steel, for Mercedes Sprinter
Step with a tread area of 1,400 x 250 mm, for the Mercedes Sprinter (906) from 2006 onwards and Sprinter (907) from 2018 onwards with rear-wheel drive, as well as VW Crafter from 2006 to 02/2017.
Only for vehicles without a trailer coupling!
The step has a non-slip surface in accordance with UVV specifications and is made of hot-dip galvanized steel.
There are four holes for the factory-fitted parking sensors. If these are not used, four cover caps are included in the scope of delivery.
Suitable for vehicles with the following dimensions:
| Designation |
Drive type |
Wheelbase |
Vehicle length |
Vehicle height |
| L2H2 |
Rear-wheel drive W906/907 |
3,665 mm |
5,932 mm |
2,620 mm |
| L3H2 |
Rear-wheel drive W906/907 |
4,325 mm |
6,967 mm |
2,616 mm |
| L4H2 |
Rear-wheel drive W906/907 |
4,325 mm |
7,367 mm |
2,613 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Further note: For vehicles with the wheelbase - L4, the approach angle is reduced!
Features of the sturdy rear step
Step size: 1,400 x 250 mm
Load capacity: 150 kg
Installation time: 1.5 hours
Weight: 22.5 kg
The HTF rear step series is an excellent entry-level solution for tradespeople and delivery vehicles. The HTF step series is available in three widths. It can be quickly attached under the rear bumper using vehicle-specific brackets. These brackets are mounted at the mounting points
on the chassis. The HTF step series is made entirely of hot-dip galvanized steel, making it very robust and indestructible. There are also versions that can be combined with trailer hitches.
PLUS points of the rigid rear step
- Ergonomic loading and unloading
- Wide tread for maximum entry
comfort - Also available
for vehicles with tow bars -
Heavy-duty - Non-slip surface in accordance with UVV
regulations - Easy
installation
without special tools - Corrosion protection: hot-dip galvanized - Step depth: 220 mm
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
