The Renault Master IV from 2024 is the current generation of Renault's large commercial van and was extensively redesigned compared with its predecessor. When a new Master is converted for use as a trade, service, courier or delivery vehicle, the cargo floor and side walls are often protected from the start – but the two projecting wheel arches should not be overlooked.
This set of two vehicle-specific wheel arch covers made from 3 mm ABS plastic provides additional protection for the left and right wheel arches against direct contact with toolboxes, transport containers, parcels and other cargo. The covers can be integrated into a new cargo area conversion or added to existing interior lining.
Which wheel arch covers fit the Renault Master IV from 2024?
In short: This set is designed for the Renault Master IV from 2024 onwards. It includes two vehicle-specific wheel arch covers for the left and right sides, made from 3 mm flexible and UV-resistant ABS plastic. Depending on the installation situation, the covers can be fitted by clamping, screwing or bonding.
🚐 Vehicle compatibility:
✓ Renault Master 4th generation
✓ From 2024 onwards
Note: A separate wheel arch cover set is required for the Renault Master III from 2010 to 2023.
Master IV rather than Master III – the generation matters
The Renault Master has been an established large commercial van for many years. However, the Master IV introduced in 2024 represents a new vehicle generation.
This distinction is important when selecting vehicle-specific cargo area components. Searching simply for “Renault Master wheel arch covers” can otherwise lead to products designed for the previous generation.
Renault Master – which generation do I have?
| Vehicle |
Model years |
Wheel arch covers |
| Renault Master III |
2010–2023 |
Separate version |
| Renault Master IV |
From 2024 |
This product |
If your vehicle is from around the model transition period, check the Master generation and model year before ordering.
Wheel arch protection for the new Master at work
The Renault Master IV provides a large cargo area for tools, machines, parcels, transport boxes and a wide variety of commercial equipment. The two wheel arches remain exposed areas because they project into the usable cargo space from either side.
During everyday loading and unloading, equipment and cargo may be pushed alongside these areas or placed directly next to them. The ABS covers create an additional protective layer between the wheel arch area itself and the transported goods.
This makes the wheel arch covers particularly useful for:
- Trade and installation companies
- Courier and delivery services
- Service and maintenance vehicles
- Fleet vehicles with frequently changing loads
- Individually converted mobile workshop vans
Why wheel arches should not be forgotten when converting a cargo area
Protecting the cargo area of a new van often starts with a floor panel and side wall lining. These cover the largest surfaces, while the two wheel arches projecting into the cargo area remain separate exposed sections.
Toolboxes, containers and other equipment can come into direct contact with these areas when being moved or stored. The vehicle-specific plastic covers therefore add targeted protection exactly where it is needed.
The wheel arch covers do not replace a cargo floor or side wall lining and do not perform any load-securing function.
3 mm ABS plastic – flexible and UV-resistant
The wheel arch covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant, making it suitable for use as a shaped interior protection component.
The set includes two wheel arch covers: one for the left and one for the right side of the vehicle.
This allows both wheel arches of the Master IV to be incorporated into the cargo area's protection concept at the same time.
Technical specifications – Renault Master IV wheel arch covers
Renault Master IV Wheel Arch Covers from 2024 – Product Specifications
| Specification |
Details |
| Vehicle |
Renault Master IV |
| Model year |
From 2024 onwards |
| Material |
ABS plastic |
| Material thickness |
3 mm |
| Material properties |
Flexible and UV-resistant |
| Installation options |
Clamping, screwing or bonding |
| Installation hardware |
Not included |
| Scope of delivery |
2 wheel arch covers – left and right |
New cargo area conversion or retrofit?
Both are possible. The wheel arch covers can be incorporated into a complete new cargo area conversion or fitted later as an addition to existing interior lining.
With a new vehicle, it makes sense to plan the wheel arch protection, cargo floor and side wall lining together. This allows the transitions between the individual components to be considered from the start.
If the Master has already been converted, the wheel arch covers can still be retrofitted, provided that shelving or other permanently installed equipment does not prevent sufficient access to the wheel arch areas.
Installation by clamping, screwing or bonding
Depending on the existing or planned cargo area conversion, the wheel arch covers can be fitted by clamping, screwing or bonding.
The most suitable fixing method depends on the individual installation situation. If cargo flooring, side wall lining or other vehicle equipment is already installed, check how the wheel arch covers can be integrated cleanly before beginning installation.
Installation note:
The required installation hardware is not included. Screws, adhesive or other fixings must be selected to suit the chosen installation method and the existing cargo area conversion.
Practical tip: check the generation of your new Master
The Renault Master name was retained when the new generation was introduced. If you are selecting accessories through a general search or referring to previous orders, pay particular attention to the model year.
Master III up to 2023 and Master IV from 2024 require different vehicle-specific versions.
A quick check of the generation and model year is much more reliable than simply hoping that “Master” on the box will be close enough. 😄
Frequently asked questions about Renault Master IV wheel arch covers
Which Renault Master are these wheel arch covers designed for?
This set is designed for the Renault Master IV from 2024 onwards.
Do these wheel arch covers also fit the Renault Master III up to 2023?
No. A separate vehicle-specific version is required for the Renault Master III from 2010 to 2023.
Are both wheel arches covered?
Yes. The set includes two wheel arch covers – one for the left and one for the right side of the vehicle.
What material are the wheel arch covers made from?
The covers are made from 3 mm ABS plastic. The material is flexible and UV-resistant.
Can the wheel arch covers be retrofitted?
Yes. The covers can be added to existing interior lining, provided that the individual installation situation allows suitable fitting.
How are the wheel arch covers installed?
Depending on the installation situation, the covers can be fitted by clamping, screwing or bonding.
Is installation hardware included?
No. The required installation hardware is not included and must be selected to suit the chosen installation method.
Wheel arch protection for the new Renault Master generation
If you are converting a Renault Master IV from 2024 for everyday commercial use, these two ABS wheel arch covers provide targeted protection for two particularly exposed areas of the cargo compartment.
The 3 mm flexible and UV-resistant plastic covers protect the left and right wheel arches and can be incorporated into a new cargo area conversion or retrofitted where the existing installation allows.
For trade, service, courier and fleet vehicles, they provide a practical addition to cargo floors and side wall lining without requiring the entire interior to be redesigned.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
