Aluminum roof rack for Nissan NV250
The aluminum roof rack for Nissan NV250 models
built between 2020 and 2021 is particularly suitable for frequent highway driving thanks to its aerodynamic shape.
Suitable for the following vehicle sizes:
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Wing doors |
2,697 mm |
4,213 mm |
1,844 mm |
2.2 m x 1.25 m |
| L2H1 |
Swing doors |
3,081 mm |
4,666 mm |
1,836 mm |
2.6 m x 1.25 m |
Note: You will find the vehicle length in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6. (Applies to German vehicle registration documents)
The shape of the cross tubes reduces wind noise and air resistance.
This makes it significantly quieter than many other roof racks on the market.
The rear rollers, for easy loading, are included in the scope of delivery.
The rollers extend across the entire width of the roof rack.
The cross bars can be positioned anywhere along a rail to suit your requirements.
The roof rack is made of corrosion-resistant galvanized aluminum.
Installation takes 35-45 minutes.
TÜV-approved and 20 g crash-tested according to ECE 17.07.
The height of the roof rack, from the top edge of the roof to the top edge of the roof rack, is approx. 24 cm.
Installation of Rhino aluminum roof racks
The aluminum roof rack from Rhino Products is mounted on the fixing points specified by the vehicle manufacturer. Plastic caps
can be seen on the roof of your van. The fixing points are located underneath these caps.
These plastic caps are removed and the mounting feet are screwed into place. The
mounting feet must first be attached to the roof rack.
You can view or download the installation plan in advance under "Technical Details."
Features of the sturdy steel
roof rack - Sturdy roof basket made of
galvanized
aluminum - Easy to install
- Can be combined with many accessories - Significantly increases
transport volume - Available for tailgates and wing doors
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
The Porte Tube Pro is an aerodynamic transport tube for transporting long items on the roof rack.
The plastic end caps with profile ensure minimal air resistance and a modern appearance.
The aluminum construction offers high stability and low weight.
Additional features:
- Quick installation in just 15 minutes
- Maximum load capacity of
50 kg allows the transport of 50 copper pipes (15 mm diameter) - Unique, lockable steel end wall offers maximum safety and strength
- Safety-approved and tested
according to 20 g crash test - Detailed
installation instructions are included with the product - No drilling is required to install this
product The Safe Clamp ladder clamp is up to 5 times faster than standard ladder clamps, is TÜV GS - 20 g crash-tested and suitable for up to 4 nested ladder sections.
Locks to secure against theft are included in the scope of delivery.
The LadderStow ladder holder offers a simple and ergonomic solution for loading and unloading ladders for light commercial vehicles.
It is made of anodized aluminum. With a ladder post and a strap at the end of the roof rack, up to 3-piece ladders can be quickly secured and transported.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden