The Rhino KammRack aluminum roof rack for Renault Master IV from 2024 combines modern aerodynamics, high stability, and tested safety in a professional carrier system. Developed for trade, commerce, and demanding transport solutions, this roof rack for Renault Master IV impresses with its quiet running, durable construction, and GS – 20 g crash-tested safety in accordance with ECE 17.07.
What makes the Rhino KammRack roof rack for Renault Master IV stand out?
The Rhino KammRack is an aerodynamically optimized aluminum roof rack that has been specially developed for the roof structure of the Renault Master IV. The cross tubes significantly reduce wind noise, while the robust aluminum construction guarantees high load capacity with low weight. Installation is carried out without drilling on the factory fixing points.
Aluminum roof rack for Renault Master IV – robust & aerodynamic
The Rhino roof rack for Renault Master IV fits perfectly to the roof line. Its flow-optimized crossbars minimize air resistance and significantly reduce noise when driving on the highway.
The scope of delivery includes rear rollers across the entire roof width, which make it much easier to load ladders, pipes, or long items. All crossbars can be flexibly positioned along the guide rails – ideal for individual requirements in trade or construction.
Vehicle variants & roof rack sizes – Renault Master IV (from 2024)
The roof rack is precisely tailored to the vehicle geometry of the Renault Master IV. The following are the compatible variants:
🚐 Vehicle variants – Renault Master IV (from 2024)
| Designation |
Drive type |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L2H2 |
Front-wheel drive |
3,585 mm |
5,680 mm |
2,500 mm |
3.2 m × 1.6 m |
| L3H2 |
Front-wheel drive |
4,215 mm |
6,310 mm |
2,500 mm |
3.8 m × 1.6 m |
💡 Note: You can find the vehicle length in the vehicle registration document under point 18, the vehicle height under point 20, and the year of manufacture under point 6 (for German vehicle registration documents).
Installation & tested safety
Installation is carried out using the factory-fitted fixing points under the plastic caps on the vehicle roof – completely without drilling. The mounting feet are screwed in place and connected to the aluminum frame. The installation height is approx. 24 cm from the top edge of the roof.
The roof rack is TÜV-tested and certified according to ECE 17.07 with a 20 g crash test. It therefore meets the highest safety standards for professional use.
Comparison: Rhino KammRack vs. simple roof rack systems
While simple steel roof racks are often noisier and create higher air resistance, the KammRack system offers:
• Aerodynamically shaped aluminum
crossbars • Lower weight
• Modular
expandability • Tested
crash safety • High-quality European manufacturing
The difference is particularly noticeable during frequent highway driving or continuous commercial use – quieter, more efficient, and more durable.
Optional accessories for maximum functionality
Numerous extensions are available for the Renault Master IV:
Porte Tube Pro: Lockable aluminum transport tube for long items (50 kg load capacity).
SafeClamp ladder clamp: 5× faster than standard clamps, GS – 20 g crash tested.
LadderStow ladder holder: Ergonomic loading and unloading system for up to 3-piece ladders.
Running board / platform: Safe working on the roof.
Rear door ladder: Non-slip aluminum ladder for swing doors.
Technical overview – Rhino KammRack Renault Master IV
📊 Technical data – Rhino KammRack Master IV
| Feature |
Value |
| Material |
Galvanized aluminum |
| Installation height |
Approx. 24 cm |
| Assembly time |
35–45 minutes |
| Safety test |
TÜV / ECE 17.07 – 20 g |
| Manufacturer |
Rhino Products |
Conclusion – Professional roof rack for maximum requirements
The Rhino KammRack roof rack for Renault Master IV offers a perfect combination of aerodynamics, stability, and tested safety. Whether for trade, construction, or camper conversion, this system is designed for durability, efficiency, and professional use.
Frequently asked questions about the Renault Master IV roof rack
Is the roof rack suitable for all Master IV variants?
Yes, for the L2H2 and L3H2 variants with front-wheel drive from model year 2024 onwards.
Does drilling have to be done for installation?
No, it is attached using the factory-fitted fixing points under the roof caps.
How loud is the roof rack when driving on the highway?
The aerodynamic cross tubes significantly reduce wind noise compared to conventional steel bars.
Is the roof rack expandable?
Yes, with accessories such as ladder holders, transport tubes, or running platforms.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
