Side electric step E1 for VW T5, VW T6, VW T6.1

Side electric step E1 for VW T5, VW T6, VW T6.1

SKU: 110E1-VT
Category: elektrische Seitentrittstufe

- Electric step in three step
widths - Slip resistance R13 according to DIN
75078-1 - Duplex coating

Stufengröße/Radstand:

from

1.265,00 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
PDF (1)

Side electric step for VW T5 and VW T6

For the VW T5 from model year 2003, VW T6 from model year 2015, and VW T6.1 from model year 2019 with the following vehicle sizes:

Designation	Rear door(s)	Wheelbase	Overall length	Cargo space length
L1H1	Tailgate	3,000 mm	4,904 mm	2,324 mm
L1H1	Swing doors	3,000 mm	4,904 mm	2,334 mm
L2H1	Tailgate	3,400 mm	5,304 mm	2,724 mm
L2H1	Wing doors	3,400 mm	5,304 mm	2,724 mm

The electric side step features a high-quality aluminum surface. When extended
, the step measures 1,000 x 300 mm and 1,200 x 300 mm.
The electric step can bear loads of up to 250 kg, allowing several people to get in and out at the same time.

The E1 step features a closed cassette system for a long service life and protection against environmental influences.
The R13 slip resistance rating is higher than required by DIN 75078-1 (KMP).
A POWER MODE for a short-term increase in power supply helps in cases of sluggishness due to protection or other adversities.
The yellow reflective strip is particularly easy to see when

getting in and out.

Dimensions/weight:	1,000 x 300 mm/ 33 kg
Dimensions/weight:	1,200 x 300 mm/44 kg
Load capacity:	250 kg
Year of manufacture:	From 2003+2015+2019
Vehicle:	VW T5, VW T6, VW T6.1
Wheelbase:	L1+L2
Drive type:	Front-wheel drive - FWD
Certification:	CE marking/ ECE R10 certificate
Slip resistance:	R13 according to DIN 51130
Displacement space:	V04 according to DIN 51130
Installation time:	Approx. 4 hours

Features at a glance:

- CE
marking - ECE R10 certificate
- Duplex-coated housing
- Slip resistance R13 according to DIN
51130 - Displacement space V04
according to DIN 51130 - High abrasion resistance (aluminum oxide grain)
- UV-resistant and
temperature-stable- Resistant to chemicals (oil, brake fluid, etc.)
- Classification C according to DIN
51097 - Running board covering tested for 1,000,000 steps
- Standby mode I- Simple emergency release
- Automatic
collision detection - Automatic load detection (15kg)
- Automatic or manual mode

The following items are included in the scope of delivery:

- Integrated collision detection
- Load detection/automatic or manual mode
- Vehicle-specific installation kit
- Warning light
- Cable
set - Door contact switch

Item information	Value
:	VW T5 und VW T6

Montageplan

Montageplan

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr

Mo - Do:	8:30 - 16:00 Uhr
Fr:	8:30 - 14:00 Uhr