Sikaflex Activator 205 for aluminum and painted surfaces
Sikaflex Activator 205 improves adhesion to smooth substrates such as
airline rails, painted surfaces, plastics, or metals.
The activator is therefore suitable for pretreating and bonding airline rails to vehicle paintwork.
Activator 205 is a solvent-based, colorless, clear adhesion cleaner that reacts with moisture and leaves adhesive compounds on the surface.
These act as a link between the substrate and the primer or adhesive.
Important note: In order to ensure adhesion and material compatibility, preliminary tests must be carried out with original materials under the respective conditions.
Application and preparation of the bonding surfaces
The adhesive surfaces must be dry, clean, and, above all, free of grease, oil, dust, and contaminants. Adhesion can be improved before application by further pretreatment steps such as sanding or cleaning.
Please read the following instructions thoroughly and observe them during processing!
The bonding surfaces must be wiped with a clean, lint-free, slightly moistened paper towel.
Never dip the paper towel into the activator! Change the paper towel each time and do not moisten the same towel twice!
Sikaflex Activator 205 must be used sparingly, as excess can lead to adhesion failure!
If the pretreated area is not bonded within the maximum flash-off time, the activation process must be repeated.
The optimum processing and surface temperature is between 15 °C and 25 °C.
Properties of the
activator - Contents: 30 ml
- Improved adhesion to many substrates
- Short flash-off
time - Transparent
Further information and instructions can be found in the technical details.
- verursacht Hautreizungen,
- verursacht schwere Augenreizung,
- kann bei Einatmen Allergie, asthmaartige Symptome oder Atembeschwerden verursachen,
- kann allergische Hautreaktionen verursachen,
- schädlich für Wasserorganismen, mit langfristiger Wirkung,
- einatmen von Nebel oder Dampf vermeiden,
- nach Gebrauch Haut gründlich waschen,
- Freisetzung in die Umwelt vermeiden,
- Schutzhandschuhe/ Augenschutz/ Gesichtsschutz tragen,
- nicht in die Kanalisation/Oberflächenwasser/Grundwasser gelangen lassen,
- nur in gut belüfteten Bereichen verwenden
- bei der Arbeit nicht essen, trinken, rauchen, schnupfen,
- Behälter dicht geschlossen halten,
- vor Erwärmung/Überhitzung und Sonneneinstrahlung schützen,
- für ausreichende Be- und Entlüftung am Arbeitsplatz sorgen,
- Berührung mit den Augen und der Haut vermeiden,
- Dämpfe/Aerosole nicht einatmen,
Sika Deutschland GmbH
Kornwestheimer Straße 103-107
70439 Stuttgart
info@de.sika.com
Payment by Invoice | 
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
