Cargo area paneling for Fiat Ducato - L2 with high and flat roof
Precisely fitting CNC-milled side panel cladding made of 4 mm thick plastic honeycomb profile and 4 or 6.5 mm uncoated or gray-coated birch plywood for Fiat Ducato models built from 2006 onwards.
For the medium wheelbase - L2 with roof height H1 or H2 and the following vehicle dimensions:
| Designation |
Wheelbase |
Overall length |
Cargo space length |
Cargo area height |
Vehicle height |
| L2H1 |
3,450 mm |
5,413 mm |
3,120 mm |
1,662 mm |
2,254 mm |
| L2H2 |
3,450 mm |
5,413 mm |
3,120 mm |
1,932 mm |
2,522 mm |
Note: The vehicle length can be found in the vehicle registration document under item: 18, the vehicle height under item: 20 and the year of manufacture under item: 6. (Applies to German vehicle registration documents)
Design and scope of delivery of the cargo area trim
The interior trim is delivered to the areas specified by the vehicle manufacturer, including all wall trim, side door trim, side door window cutouts, and lower rear door cutouts.
The coating is resistant to most common chemicals and easy to clean.
The dead weight is 2.7 kg/m² for 4 mm plywood panels and 1.5 kg/m² for 4 mm plastic honeycomb panels. Uncoated
plywood is suitable for coating with fabrics or felt. The flexible but stable plastic honeycomb profile or the gray-coated plywood, which is resistant to moisture, is recommended for protecting the cargo area.
The mounting kit is included in the scope of delivery.
Mounting is done with self-tapping screws.
The original fastening points are not taken into account during installation.
Features of the side wallpaneling - Precisely milled to fit your vehicle
- Mounting materials included in
delivery - 4 mm
plastic honeycomb profile - 4 or 6.5 mm multiplex plywood
Shipping is carried out by a freight forwarder.
Koskisen Oje
Tehdastie 2
16600 Järvelä
Finnland
info@koskisen.com
Zahlung auf Rechnung | 
So finden Sie uns
info@kurierbedarf.com
Einkauf für Schweizer Kunden
