A single loading operation will not necessarily leave visible marks. But on a Fiat Ducato from 2006 that is used regularly, hundreds or even thousands of loading and unloading operations can add up over the years. Tool cases, materials, parcels and transport containers are moved through the rear of the vehicle again and again – with the rear bumper positioned directly alongside this frequently used area.
The vehicle-specific aluminium rear bumper protector for the Fiat Ducato covers this exposed section of the bumper. It can provide additional protection for a surface that is still in good condition and can also conceal existing scratches or damage if they are located within the area covered by the protector.
Six different surface finishes are available. All versions are made from 1.5 mm aluminium, feature a folded edge and are attached using the special adhesive tape applied to the rear.
Which bumper protector fits the Fiat Ducato?
In short: This aluminium rear bumper protector is designed for the Fiat Ducato from 2006. All six versions are made from 1.5 mm aluminium and feature a folded edge. Installation is carried out using special adhesive tape on the rear of the protector, so no drilling or screws are required.
Many loading operations – the same area every time
On a working van, wear is not caused only by particularly heavy or bulky cargo. Another important factor is how often the vehicle is loaded and unloaded.
A tool case may be taken out in the morning and loaded back in later. Material boxes are added, containers are exchanged and parcels may be handled several times throughout the day. Each individual operation may seem insignificant, but together they mean that the rear of the vehicle is used again and again.
The rear bumper is positioned exactly where cargo is lifted out, placed into the vehicle or briefly moved across the rear area while changing grip. The bumper protector adds an aluminium cover to this frequently used section.
It is not only the weight that matters
Typical routines during daily loading and unloading
| Situation |
What it means for the loading edge |
| Loading tools every day |
Repeated movements bring tool cases and equipment past the rear area on a regular basis. |
| Restocking materials |
Boxes and containers are moved across the rear section when the vehicle is loaded. |
| Multiple stops per day |
Every additional loading or unloading operation brings cargo past the same bumper area again. |
| Changing grip while unloading |
Items may briefly come into contact with the loading-edge area while being lifted or repositioned. |
Protect it early or retrofit it later
You do not have to wait until obvious scratches appear before fitting a bumper protector. If the rear bumper is still in good condition, the aluminium cover can be installed early to provide additional protection for the covered area during future loading operations.
A Fiat Ducato that has already spent years in service may, on the other hand, show visible signs of use. If scratches or damage are located within the area covered by the protector, they can be concealed underneath the aluminium surface.
This makes the bumper protector suitable both for vehicles at an earlier stage of their working life and for Ducato vans that have already completed countless jobs and loading operations.
Six finishes in 1.5 mm aluminium
The Fiat Ducato bumper protector is available in six different surface finishes. The base material remains the same for every version: all six are made from 1.5 mm aluminium.
Available aluminium surface finishes
| Version |
Surface finish |
Thickness |
| Aluminium chequer plate |
Classic chequer plate surface |
1.5 mm |
| Silver anodised chequer plate |
Silver anodised aluminium chequer plate |
1.5 mm |
| Black anodised chequer plate |
Black anodised aluminium chequer plate |
1.5 mm |
| Aluminium stainless-steel look |
Brushed aluminium with a stainless-steel appearance |
1.5 mm |
| Matt silver anodised |
Aluminium with machined grooves |
1.5 mm |
| Black anodised |
Aluminium with machined grooves |
1.5 mm |
Chequer plate, stainless-steel look or machined grooves?
As the material and thickness are the same across all six versions, the choice can primarily be based on the appearance you prefer.
The classic aluminium chequer plate provides a technical commercial-vehicle look and is also available in silver anodised and black anodised versions.
For a more understated surface, you can choose brushed aluminium with a stainless-steel look. This version is also made from aluminium. “Stainless-steel look” refers only to the appearance of the surface and does not mean that the protector is made from stainless steel.
Alternatively, matt silver anodised and black anodised aluminium versions with machined grooves are available.
Folded edge for additional protection
The Fiat Ducato bumper protector is supplied with a folded edge. This design is intended to provide additional protection around the loading edge.
With frequent loading and unloading, this area may regularly be passed by tools, materials, boxes and other cargo.
Self-adhesive installation without drilling or screws
A high-quality self-adhesive special tape is applied to the rear of the protector. This is used to attach the aluminium bumper protector to the intended area of the rear bumper.
No drilling or screws are required.
Important before installation:
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Technical specifications
Aluminium rear bumper protector for Fiat Ducato
| Feature |
Specification |
| Vehicle |
Fiat Ducato |
| Model year |
From 2006 |
| Material |
Aluminium |
| Material thickness |
1.5 mm |
| Surface finishes |
6 versions |
| Design |
With folded edge |
| Attachment |
Self-adhesive special tape on the rear |
| Drilling / screws |
Not required |
Practical tip: It is the number of loading operations that adds up
When protecting the loading edge, it is worth looking beyond the heaviest or largest item you transport. A tool case or material box that is moved several times every working day may pass the rear bumper far more often than a bulky item carried only occasionally.
If your Ducato is in regular use, consider the frequency of loading: How many times per day are items loaded and unloaded? Which containers are handled repeatedly? And where do you usually change grip when lifting items in or out?
Each individual movement may seem insignificant. Over time, however, it is precisely these repeated everyday routines that can contribute to visible signs of use around frequently used areas of the vehicle.
Frequently asked questions
Which Fiat Ducato does the bumper protector fit?
The bumper protector is designed for the Fiat Ducato from 2006.
How thick is the aluminium bumper protector?
All six available versions are made from 1.5 mm aluminium.
Is the stainless-steel-look version made from stainless steel?
No. This version is also made from aluminium. “Stainless-steel look” refers only to the appearance of the brushed surface.
Can the bumper protector conceal existing scratches?
Yes. If scratches or damage are located within the area covered by the protector, they can be concealed underneath the aluminium surface.
Does the bumper protector need to be screwed into place?
No. It is attached using the special adhesive tape applied to the rear. No drilling or screws are required.
What should I check before installation?
Please read the installation instructions under “Technical Details” completely before fitting the protector and follow the specified requirements.
Protection for a rear area used every working day
Whether the Fiat Ducato from 2006 is loaded once a day or repeatedly during multiple stops, the rear bumper sits directly alongside an area involved in many everyday loading routines.
The 1.5 mm aluminium rear bumper protector covers this section, can conceal existing signs of use within the area it covers and is available in six different surface finishes.
The special adhesive tape on the rear allows installation without drilling or screws.
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
