The aluminum roof rack for Toyota ProAce Max models built in 2024 or later is a professional roof solution for anyone who regularly transports long items, ladders, or bulky materials. The streamlined tube shape makes the roof rack particularly suitable for frequent highway driving: less air resistance, more pleasant noise levels, and a stable roof loading area for everyday use.
Technical data & important product information
-
Vehicle: Toyota ProAce Max from model year 2024 onwards
-
Material: Galvanized, corrosion-resistant aluminum
-
Installation time: approx. 35–45 minutes
-
Safety standard: 20 g crash-tested according to ECE 17.07
-
Installation height: approx. 24 cm from the top edge of the roof
-
Crossbars: can be freely positioned along the rail
-
Rear doors: according to table for hinged doors (other variants possible depending on model)
Scope of delivery:
✔ Aluminum roof basket system
✔ Rear rollers for easier loading (included as standard, across the entire width)
✔ Crossbars (freely positionable) & mounting feet
✔ Mounting material
✔ Mounting instructions / mounting plan (under "Technical details")
The standard rear rollers on the ProAce Max are particularly helpful when pipes, ladders, or profiles are regularly loaded and unloaded. Compared to many roof racks without rollers, loading is noticeably faster and gentler on materials—especially in everyday construction or service work.
Suitable vehicle sizes – Toyota ProAce Max
📏 Vehicle dimensions & roof basket sizes – Toyota ProAce Max (from 2024)
| Designation |
Rear door(s) |
Wheelbase |
Overall length |
Vehicle height |
Roof rack size |
| L1H1 |
Wing doors |
3,000 mm |
4,963 mm |
2,254 mm |
3.2 m × 1.7 m |
| L2H1 |
Swing doors |
3,450 mm |
5,413 mm |
2,254 mm |
3.2 m × 1.7 m |
| L2H2 |
Swing doors |
3,450 mm |
5,413 mm |
2,524 mm |
3.2 m × 1.7 m |
| L3H2 |
Swing doors |
4,035 mm |
5,998 mm |
2,524 mm |
3.8 m × 1.7 m |
| L3H3 |
Swing doors |
4,035 mm |
5,998 mm |
2,764 mm |
3.6 m × 1.6 m |
| L4H2 |
Swing doors |
4,035 mm |
6,363 mm |
2,524 mm |
4.2 m × 1.7 m |
| L4H3 |
Swing doors |
4,035 mm |
6,363 mm |
2,764 mm |
4.2 m × 1.6 m |
Note: The vehicle length can be found in the vehicle registration document under item 18, the vehicle height under item 20, and the year of manufacture under item 6 (applies to German vehicle registration documents).
The height of the roof rack, from the top edge of the roof to the top edge of the roof rack, is approx. 24 cm.
Installation of Rhino aluminum roof racks
The aluminum roof rack from Rhino Products is mounted at the fixing points provided by the vehicle manufacturer. Plastic caps are visible on the roof – the mounting points are located underneath them. After removing the caps, the mounting feet are screwed in place. You can view or download the installation plan under "Technical Details."
Features of the aluminum roof racks
- Sturdy roof rack made of galvanized aluminum
- Aerodynamic, quiet design (reduced air resistance)
-
Rear rollers included in delivery – across the entire width
- Crossbars can be freely positioned for flexible loading
- Easy installation in 35–45 minutes
- Significant increase in transport volume
- Can be combined with many accessories
Application profile – what the ProAce Max roof basket is particularly suitable for
-
Craftsmen & construction sites: ladder packs, pipes, rails, cable ducts – robust support and many securing points
-
Service & assembly: lots of highway driving – aerodynamic and quieter in everyday use
-
Transport & trade: transport bulky goods on the outside when the cargo area is full
Aerodynamics comparison – Rhino vs. simple roof racks
Roof rack profiles have a particularly strong effect on noise in large panel vans. Compared to angular standard racks, the tubular shape of this roof basket aims to create a more even airflow. This is particularly noticeable on longer journeys and at higher speeds.
Material comparison – aluminum vs. steel for Toyota ProAce Max from 2024
⚖️ Material choice in everyday life: aluminum or steel?
| Criterion |
Aluminum roof rack |
Steel carrier |
| Weight/handling |
Lighter – good for service and installation |
Heavier |
| Corrosion |
Very resistant, low maintenance |
Coating is crucial |
| Long-term operation |
Robust against everyday influences |
Requires more maintenance if paintwork is damaged |
| Noise / aerodynamics |
Often quieter due to profile |
More dependent on profile |
Roof basket vs. cross bars – why roof baskets often have an advantage in the ProAce Max
A roof basket offers more support surface and more flexible securing options than individual crossbars. This is particularly practical if the load changes frequently or is bulky. Crossbars are useful if you need to mount special structures at specific points – the roof basket, on the other hand, is the "all-round" solution for everyday professional use.
Why Rhino instead of cheaper roof racks?
Cheap universal carriers often compromise on fit, details, and comfort. Rhino relies on a system that is designed for everyday commercial use – with tested safety and practical features such as standard rear rollers.
-
TÜV-tested & 20 g according to ECE 17.07
-
Rear rollers as standard – loading across the entire width
-
Flexibly positionable crossbars for different loads
-
Corrosion-resistant aluminum for year-round use
-
Expandable with professional accessories
Extensions and optional accessories for aluminum roof racks
The following optional accessories can be ordered for this roof rack.
Transport tube – Porte Tube Pro
An aerodynamic transport tube for transporting long items on the roof rack. Profile end caps reduce air resistance, while the aluminum construction offers high stability and low weight.
- Quick installation in just 15 minutes
- Maximum load capacity of 50 kg (e.g., for copper pipes Ø 15 mm)
- Lockable steel end wall offers maximum security
- Safety-approved and crash-tested to 20 g
- Assembly without drilling
Ladder clamp – Safe Clamp
Up to 5× faster than standard ladder clamps, TÜV GS and 20 g crash tested, suitable for up to 4 nested ladder sections. Locks to secure against theft are included.
LadderStow ladder holder
Ergonomic solution for loading and unloading ladders for light commercial vehicles. Made of anodized aluminum, suitable for up to 3-piece ladders.
Walkway / platform
Makes it easier to load bulky items onto the vehicle roof. The necessary mounting hardware is included in the scope of delivery.
Conclusion
The aluminum roof rack for Toyota ProAce Max from 2024 combines aerodynamic design, robust aluminum construction, and practical loading assistance. With rear rollers included in the scope of delivery, freely positionable crossbars, and tested safety, it is a professional solution for trade, service, and transport.
Rhino Products B.V.
Orionpoort 3
5971 LZ Venlo-Grubbenvorst
Niederlande
sales@rhinoproducts.eu
Payment by Invoice |
How to find our store
info@kurierbedarf.com
Purchasing for Swiss customers
